> -----Original Message----- > From: Otavio Salvador [mailto:[email protected]] > Sent: Thursday, July 07, 2016 9:39 PM > To: Ting Liu <[email protected]> > Cc: [email protected] > Subject: Re: [meta-freescale] [meta-freescale-layer][PATCH 01/67] remove > not supported e500v2 machines > > On Mon, Jul 4, 2016 at 7:41 AM, <[email protected]> wrote: > > From: Ting Liu <[email protected]> > > > > Remove the below machines which are not supported/tested: > > bsc9131rdb, bsc9132qds, p1010rdb, p1020rdb, p1021rdb, p1022ds > > p1023rdb, p1025twr, p2020rdb > > > > Signed-off-by: Ting Liu <[email protected]> > > i understand why you are doing this but I don't support this. There are users > out there using those and as such NXP should keep those supported. We use > same rule for i.MX and what we do is moving the old BSP machines for > mainline kernel/u-boot so people has at least an upgrade path. [Liu Ting-B28495] I understand your points. But these boards are not tested with the latest kernel/u-boot/fm-ucode/qe-ucode/etc. We want to remove them to avoid confusion.
It is easy to add back the machine configuration files. The recipes for kernel/u-boot/etc. should be rolled back to the previous revision on which these boards are supported too. Anyway, this need effort to verify, including build and function. -Ting -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
