On 16/10/2017 15:46, Otavio Salvador wrote: > On Mon, Oct 16, 2017 at 11:05 AM, georg <g968...@gmail.com> wrote: >>> Hello, >>> >>> On Mon, Oct 16, 2017 at 6:27 AM, georg <g968...@gmail.com> wrote: >>>> I have started a script this weekend which tries to do a git clone with >>>> --mirror in a loop every hour till it succeeds. This was working, I have >>>> now a cloned linux-imx.git repository which I can use in all future builds. >>>> >>>> Nonetheless it's very annoying to not be able to do a simple "bitbake >>>> core-image-minimal" with a standard freescale evaluation board. >>> >>> I am curious to know which machine as we use linux-fslc-imx for most >>> machines as default. >>> >> Ah, that's interesting. I thought it's the same repository for all >> freescale processors. It's for imx6ull. > > If you can, test rocko and change the machine to use u-boot-fslc and > linux-fslc-imx so we confirm it works there. If it does, we can > change. > Hello,
I have done my previous tests on master (morty doesn't support imx6ull). So if have tested rocko and change this file: meta-freescale/conf/machine/imx6ullevk.conf. I have removed the following lines: PREFERRED_PROVIDER_u-boot = "u-boot-imx" PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx" PREFERRED_PROVIDER_virtual/kernel = "linux-imx" It seems that imx-base.inc let chose bitbake u-boot-fslc and linux-fslc-imx. I have u-boot-fslc-v2017.09+gitAUTOINC+a6a15fedd1-r0 and linux-fslc-imx-4.1-2.0.x+gitAUTOINC+6c1ad49339-r0 in my buildstats. So now it's using u-boot-fslc and linux-fslc-imx. The download is slow too, but without connection errors. After several hours, the kernel sources are downloaded. The build is successful, but boot sucks. U-boot boots correctly, but not linux. I have a reboot without any kernel trace near the end of the boot, like that: >Configuring network interfaces... fec 20b4000.ethernet eth0: Freescale >FEC PHY driver [Micrel KSZ8081 or KSZ8091] >(mii_bus:phy_addr=20b4000.ethernet:01, irq=-1) >IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >udhcpc (v1.24.1) started >Sending discover... >Sending discover... >fec 20b4000.ethernet eth0: Link is Up - 100Mbps/Full - flow control >rx/tx >IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >Sending discover... > > >U-Boot 2017.09+fslc+ga6a15fe (Oct 17 2017 - 13:56:43 +0200) I have no idea why. There is no kernel crash trace so it's perhaps something like the watchdog. Regards, Georg -- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale