The WIC image for K3 depends on the TI-SCI firmware, on AM65x and J721e also the bootloader. Make this clear by only depending on firmware in the base k3.inc file, then adding the bootloader dependency in AM65x and J721e specific includes.
Remove unneeded overrides from the evm level files. Remove do_image_tar dependencies as the tar files do not include the bootloader nor TI-SCI firmware, only the boot partition of the WIC file needs these. Signed-off-by: Andrew Davis <[email protected]> --- meta-ti-bsp/conf/machine/include/am62xx.inc | 3 --- meta-ti-bsp/conf/machine/include/am64xx.inc | 8 +++----- meta-ti-bsp/conf/machine/include/am65xx.inc | 10 +++++----- meta-ti-bsp/conf/machine/include/j721e.inc | 11 +++++++++++ meta-ti-bsp/conf/machine/include/k3.inc | 3 +-- meta-ti-bsp/conf/machine/include/omap-a15.inc | 2 +- meta-ti-bsp/conf/machine/include/ti43x.inc | 2 +- meta-ti-bsp/conf/machine/j7200-evm.conf | 3 --- meta-ti-bsp/conf/machine/j721e-evm.conf | 3 --- meta-ti-bsp/conf/machine/j721e-hs-evm.conf | 7 ------- meta-ti-bsp/conf/machine/j721s2-evm.conf | 3 --- meta-ti-bsp/conf/machine/j784s4-evm.conf | 3 --- 12 files changed, 22 insertions(+), 36 deletions(-) diff --git a/meta-ti-bsp/conf/machine/include/am62xx.inc b/meta-ti-bsp/conf/machine/include/am62xx.inc index 9d8bc87c..411e5265 100644 --- a/meta-ti-bsp/conf/machine/include/am62xx.inc +++ b/meta-ti-bsp/conf/machine/include/am62xx.inc @@ -12,9 +12,6 @@ PREFERRED_PROVIDER_virtual/libgles2 ?= "ti-img-rogue-umlibs" PREFERRED_PROVIDER_virtual/libgbm ?= "ti-img-rogue-umlibs" PREFERRED_PROVIDER_virtual/gpudriver ?= "ti-img-rogue-driver" -do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" -do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" - TFA_BOARD = "lite" TFA_K3_SYSTEM_SUSPEND = "1" diff --git a/meta-ti-bsp/conf/machine/include/am64xx.inc b/meta-ti-bsp/conf/machine/include/am64xx.inc index f1a91991..0fd15b90 100644 --- a/meta-ti-bsp/conf/machine/include/am64xx.inc +++ b/meta-ti-bsp/conf/machine/include/am64xx.inc @@ -17,19 +17,17 @@ KERNEL_DEVICETREE = " \ # Default tiboot3.bin on AM64x is for SR2.0 HS-FS BBMULTICONFIG = "k3r5-sr2-hs-fs" do_image_wic[mcdepends] = "mc::k3r5-sr2-hs-fs:ti-sci-fw:do_deploy" -do_image_tar[mcdepends] = "mc::k3r5-sr2-hs-fs:ti-sci-fw:do_deploy" +IMAGE_BOOT_FILES += "tiboot3-am64x_sr2-hs-fs-evm.bin" # Since default tiboot3.bin on AM64x is for SR2.0 HS-FS, add a version for GP BBMULTICONFIG += "k3r5-gp" -IMAGE_BOOT_FILES += "tiboot3-am64x-gp-evm.bin" do_image_wic[mcdepends] += "mc::k3r5-gp:ti-sci-fw:do_deploy" -do_image_tar[mcdepends] += "mc::k3r5-gp:ti-sci-fw:do_deploy" +IMAGE_BOOT_FILES += "tiboot3-am64x-gp-evm.bin" # Since default tiboot3.bin on AM64x is for SR2.0 HS-FS, add a version for SR2.0 HS-SE BBMULTICONFIG += "k3r5-sr2-hs-se" -IMAGE_BOOT_FILES += "tiboot3-am64x_sr2-hs-evm.bin" do_image_wic[mcdepends] += "mc::k3r5-sr2-hs-se:ti-sci-fw:do_deploy" -do_image_tar[mcdepends] += "mc::k3r5-sr2-hs-se:ti-sci-fw:do_deploy" +IMAGE_BOOT_FILES += "tiboot3-am64x_sr2-hs-evm.bin" TFA_BOARD = "lite" diff --git a/meta-ti-bsp/conf/machine/include/am65xx.inc b/meta-ti-bsp/conf/machine/include/am65xx.inc index 88259717..424864d3 100644 --- a/meta-ti-bsp/conf/machine/include/am65xx.inc +++ b/meta-ti-bsp/conf/machine/include/am65xx.inc @@ -26,17 +26,17 @@ KERNEL_DEVICETREE = " \ ti/k3-am654-evm-ov5640.dtbo \ " -BBMULTICONFIG += "k3r5-sr2" +# On AM65x the file tiboot3.bin comes from the bootloader not ti-sci-fw +do_image_wic[mcdepends] += "mc::k3r5:virtual/bootloader:do_deploy" -# Since J721e does not support multi-cert tiboot3.bin add standalone sysfw.itb +# Default sysfw.itb on AM65x is for SR2.0 +BBMULTICONFIG += "k3r5-sr2" +do_image_wic[mcdepends] += "mc::k3r5-sr2:ti-sci-fw:do_deploy" IMAGE_BOOT_FILES += "sysfw.itb" # Since default sysfw.itb on AM65x is for SR2.0, add a version for SR1.0 IMAGE_BOOT_FILES += "sysfw-am65x-evm.itb" -do_image_wic[mcdepends] += "mc::k3r5-sr2:ti-sci-fw:do_deploy" -do_image_tar[mcdepends] += "mc::k3r5-sr2:ti-sci-fw:do_deploy" - TFA_BOARD = "generic" OPTEEMACHINE = "k3-am65x" diff --git a/meta-ti-bsp/conf/machine/include/j721e.inc b/meta-ti-bsp/conf/machine/include/j721e.inc index 12ee0c90..6322fe46 100644 --- a/meta-ti-bsp/conf/machine/include/j721e.inc +++ b/meta-ti-bsp/conf/machine/include/j721e.inc @@ -9,6 +9,17 @@ PREFERRED_PROVIDER_virtual/libgles2 ?= "ti-img-rogue-umlibs" PREFERRED_PROVIDER_virtual/libgbm ?= "ti-img-rogue-umlibs" PREFERRED_PROVIDER_virtual/gpudriver ?= "ti-img-rogue-driver" +# On J721e the file tiboot3.bin comes from the bootloader not ti-sci-fw +do_image_wic[mcdepends] += "mc::k3r5:virtual/bootloader:do_deploy" + +# Default sysfw.itb on J721e is for SR1.1 +BBMULTICONFIG += "k3r5-sr1-1" +do_image_wic[mcdepends] += "mc::k3r5-sr1-1:ti-sci-fw:do_deploy" +IMAGE_BOOT_FILES += "sysfw.itb" + +# Since default sysfw.itb on J721e is for SR1.1, add a version for SR1.0 +IMAGE_BOOT_FILES += "sysfw-j721e-evm.itb" + TFA_BOARD = "generic" OPTEEMACHINE = "k3-j721e" diff --git a/meta-ti-bsp/conf/machine/include/k3.inc b/meta-ti-bsp/conf/machine/include/k3.inc index bd71becf..a34b67ff 100644 --- a/meta-ti-bsp/conf/machine/include/k3.inc +++ b/meta-ti-bsp/conf/machine/include/k3.inc @@ -47,7 +47,6 @@ MACHINE_FEATURES += "efi" WKS_FILE ?= "sdimage-2part-efi.wks" do_image_wic[depends] += "virtual/bootloader:do_deploy" -do_image_wic[mcdepends] += "mc::k3r5:virtual/bootloader:do_deploy mc::k3r5:ti-sci-fw:do_deploy" -do_image_tar[mcdepends] += "mc::k3r5:virtual/bootloader:do_deploy mc::k3r5:ti-sci-fw:do_deploy" +do_image_wic[mcdepends] += "mc::k3r5:ti-sci-fw:do_deploy" TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_K3}" diff --git a/meta-ti-bsp/conf/machine/include/omap-a15.inc b/meta-ti-bsp/conf/machine/include/omap-a15.inc index f548f3fd..0843fb28 100644 --- a/meta-ti-bsp/conf/machine/include/omap-a15.inc +++ b/meta-ti-bsp/conf/machine/include/omap-a15.inc @@ -50,4 +50,4 @@ MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa etherne IMAGE_FSTYPES += "tar.xz wic.xz wic.bmap" WKS_FILE ?= "sdimage-2part.wks" IMAGE_BOOT_FILES ?= "${SPL_BINARY} u-boot.${UBOOT_SUFFIX} ${UBOOT_EXTLINUX_BOOT_FILES}" -do_image_wic[depends] += "u-boot:do_deploy" +do_image_wic[depends] += "virtual/bootloader:do_deploy" diff --git a/meta-ti-bsp/conf/machine/include/ti43x.inc b/meta-ti-bsp/conf/machine/include/ti43x.inc index 5509a54d..74a964db 100644 --- a/meta-ti-bsp/conf/machine/include/ti43x.inc +++ b/meta-ti-bsp/conf/machine/include/ti43x.inc @@ -59,4 +59,4 @@ MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa etherne IMAGE_FSTYPES += "tar.xz wic.xz wic.bmap" WKS_FILE ?= "sdimage-2part.wks" IMAGE_BOOT_FILES ?= "${SPL_BINARY} u-boot.${UBOOT_SUFFIX} ${UBOOT_EXTLINUX_BOOT_FILES}" -do_image_wic[depends] += "u-boot:do_deploy" +do_image_wic[depends] += "virtual/bootloader:do_deploy" diff --git a/meta-ti-bsp/conf/machine/j7200-evm.conf b/meta-ti-bsp/conf/machine/j7200-evm.conf index 303ec182..33c39a52 100644 --- a/meta-ti-bsp/conf/machine/j7200-evm.conf +++ b/meta-ti-bsp/conf/machine/j7200-evm.conf @@ -12,6 +12,3 @@ KERNEL_DEVICETREE = " \ " UBOOT_MACHINE = "j7200_evm_a72_config" - -do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" -do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" diff --git a/meta-ti-bsp/conf/machine/j721e-evm.conf b/meta-ti-bsp/conf/machine/j721e-evm.conf index d28d16d1..fe28e6f5 100644 --- a/meta-ti-bsp/conf/machine/j721e-evm.conf +++ b/meta-ti-bsp/conf/machine/j721e-evm.conf @@ -7,9 +7,6 @@ require conf/machine/include/j721e.inc SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" -# Since J721e does not support multi-cert tiboot3.bin add standalone sysfw.itb -IMAGE_BOOT_FILES += "sysfw.itb" - KERNEL_DEVICETREE = " \ ti/k3-j721e-common-proc-board.dtb \ ti/k3-j721e-common-proc-board-infotainment.dtbo \ diff --git a/meta-ti-bsp/conf/machine/j721e-hs-evm.conf b/meta-ti-bsp/conf/machine/j721e-hs-evm.conf index 9ef7b86a..acd5ca18 100644 --- a/meta-ti-bsp/conf/machine/j721e-hs-evm.conf +++ b/meta-ti-bsp/conf/machine/j721e-hs-evm.conf @@ -18,10 +18,3 @@ SPL_BINARY = "tispl.bin_HS" UBOOT_BINARY = "u-boot.img_HS" UBOOT_SYMLINK = "u-boot.img" SYSFW_SYMLINK = "" - -BBMULTICONFIG += "k3r5-sr1-1" - -# Since default sysfw.itb on J721e is for SR1.1, add a version for SR1.0 -IMAGE_BOOT_FILES += "sysfw-j721e-evm.itb" -do_image_wic[mcdepends] += "mc::k3r5-sr1-1:ti-sci-fw:do_deploy" -do_image_tar[mcdepends] += "mc::k3r5-sr1-1:ti-sci-fw:do_deploy" diff --git a/meta-ti-bsp/conf/machine/j721s2-evm.conf b/meta-ti-bsp/conf/machine/j721s2-evm.conf index 46d5dbf6..3576414d 100644 --- a/meta-ti-bsp/conf/machine/j721s2-evm.conf +++ b/meta-ti-bsp/conf/machine/j721s2-evm.conf @@ -15,6 +15,3 @@ KERNEL_DEVICETREE = " \ " UBOOT_MACHINE = "j721s2_evm_a72_defconfig" - -do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" -do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" diff --git a/meta-ti-bsp/conf/machine/j784s4-evm.conf b/meta-ti-bsp/conf/machine/j784s4-evm.conf index f8be7d18..73f3eb8c 100644 --- a/meta-ti-bsp/conf/machine/j784s4-evm.conf +++ b/meta-ti-bsp/conf/machine/j784s4-evm.conf @@ -14,6 +14,3 @@ KERNEL_DEVICETREE = " \ " UBOOT_MACHINE = "j784s4_evm_a72_defconfig" - -do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" -do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" -- 2.38.1
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#15428): https://lists.yoctoproject.org/g/meta-ti/message/15428 Mute This Topic: https://lists.yoctoproject.org/mt/95525682/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
