On Wed, Jan 18, 2023 at 01:28:12PM -0600, Ryan Eatmon wrote: > > > On 1/18/2023 12:36, Denys Dmytriyenko wrote: > >On Wed, Dec 07, 2022 at 03:43:12PM -0600, Andrew Davis via > >lists.yoctoproject.org wrote: > >>The WIC image for K3 depends on the TI-SCI firmware, on AM65x and J721e > >>also the bootloader. Make this clear by only depending on firmware in > >>the base k3.inc file, then adding the bootloader dependency in AM65x and > >>J721e specific includes. > >> > >>Remove unneeded overrides from the evm level files. > >> > >>Remove do_image_tar dependencies as the tar files do not include > >>the bootloader nor TI-SCI firmware, only the boot partition of > >>the WIC file needs these. > >> > >>Signed-off-by: Andrew Davis <[email protected]> > >>--- > >>diff --git a/meta-ti-bsp/conf/machine/include/j721e.inc > >>b/meta-ti-bsp/conf/machine/include/j721e.inc > >>index 12ee0c90..6322fe46 100644 > >>--- a/meta-ti-bsp/conf/machine/include/j721e.inc > >>+++ b/meta-ti-bsp/conf/machine/include/j721e.inc > >>@@ -9,6 +9,17 @@ PREFERRED_PROVIDER_virtual/libgles2 ?= > >>"ti-img-rogue-umlibs" > >> PREFERRED_PROVIDER_virtual/libgbm ?= "ti-img-rogue-umlibs" > >> PREFERRED_PROVIDER_virtual/gpudriver ?= "ti-img-rogue-driver" > >>+# On J721e the file tiboot3.bin comes from the bootloader not ti-sci-fw > >>+do_image_wic[mcdepends] += "mc::k3r5:virtual/bootloader:do_deploy" > >>+ > >>+# Default sysfw.itb on J721e is for SR1.1 > >>+BBMULTICONFIG += "k3r5-sr1-1" > > > >There's a slight problem - k3r5-sr1-1 multiconfig previously only applied to > >the HS j721e-hs-evm device, but not the GP j721e-evm, see below. > > > >Hence there's no corresponding k3r5 config j721e-evm-k3r5-sr1-1.conf exists, > >only the one for the HS - j721e-hs-evm-k3r5-sr1-1.conf > > > >Since you moved the above BBMULTICONFIG line into the common j721e.inc, it > >now > >breaks with the error: > > > >MACHINE=j721e-evm-k3r5-sr1-1 is invalid. Please set a valid MACHINE in your > >local.conf, environment or other configuration file. > > > >I can re-spin this series with a fix, so it's easier for Ryan to apply... > > I literally just ran into this while doing the test builds and added > the missing file. Please feel free to redo the patch series and > I'll reapply everything.
Well, it wasn't as simple as just adding the conf file... Anyway, I'm beginning to suspect that J721e SR1.1 is identical to SR1 for GP devices and only differs for HS devices. See this code in the imggen Makefile: https://git.ti.com/cgit/k3-image-gen/k3-image-gen/tree/Makefile#n50 ifeq ($(SOC_TYPE),gp) ifeq ($(SOC), j721e_sr1_1) override SOC = j721e endif endif So, basically it falls back to the same code path, meaning building both of them is just a waste of time, moreover the filenames will need to be accounted for, as it does not generate the required sysfw-j721e_sr1_1-evm.itb and obviously fails to deploy... > >>+do_image_wic[mcdepends] += "mc::k3r5-sr1-1:ti-sci-fw:do_deploy" > >>+IMAGE_BOOT_FILES += "sysfw.itb" > >>+ > >>+# Since default sysfw.itb on J721e is for SR1.1, add a version for SR1.0 > >>+IMAGE_BOOT_FILES += "sysfw-j721e-evm.itb" > >>+ > >> TFA_BOARD = "generic" > >> OPTEEMACHINE = "k3-j721e" > > > ><snip> > > > >>diff --git a/meta-ti-bsp/conf/machine/j721e-evm.conf > >>b/meta-ti-bsp/conf/machine/j721e-evm.conf > >>index d28d16d1..fe28e6f5 100644 > >>--- a/meta-ti-bsp/conf/machine/j721e-evm.conf > >>+++ b/meta-ti-bsp/conf/machine/j721e-evm.conf > >>@@ -7,9 +7,6 @@ require conf/machine/include/j721e.inc > >> SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" > >> SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >>-# Since J721e does not support multi-cert tiboot3.bin add standalone > >>sysfw.itb > >>-IMAGE_BOOT_FILES += "sysfw.itb" > >>- > >> KERNEL_DEVICETREE = " \ > >> ti/k3-j721e-common-proc-board.dtb \ > >> ti/k3-j721e-common-proc-board-infotainment.dtbo \ > >>diff --git a/meta-ti-bsp/conf/machine/j721e-hs-evm.conf > >>b/meta-ti-bsp/conf/machine/j721e-hs-evm.conf > >>index 9ef7b86a..acd5ca18 100644 > >>--- a/meta-ti-bsp/conf/machine/j721e-hs-evm.conf > >>+++ b/meta-ti-bsp/conf/machine/j721e-hs-evm.conf > >>@@ -18,10 +18,3 @@ SPL_BINARY = "tispl.bin_HS" > >> UBOOT_BINARY = "u-boot.img_HS" > >> UBOOT_SYMLINK = "u-boot.img" > >> SYSFW_SYMLINK = "" > >>- > >>-BBMULTICONFIG += "k3r5-sr1-1" > >>- > >>-# Since default sysfw.itb on J721e is for SR1.1, add a version for SR1.0 > >>-IMAGE_BOOT_FILES += "sysfw-j721e-evm.itb" > >>-do_image_wic[mcdepends] += "mc::k3r5-sr1-1:ti-sci-fw:do_deploy" > >>-do_image_tar[mcdepends] += "mc::k3r5-sr1-1:ti-sci-fw:do_deploy"
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#15587): https://lists.yoctoproject.org/g/meta-ti/message/15587 Mute This Topic: https://lists.yoctoproject.org/mt/95525682/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
