On 2/3/21 3:13 PM, Leon Woestenberg wrote: > Hello Mark, > >> I have updated these (force push). pmu-firmware is now building the proper >> 2020.2 version, again, I've not verified it's functional -- just that it's >> building. > > Re-cloned. > > (Thanks for the anti-fool test of not including meta-microblaze, your > assumption was right.) > > The PMU builds and boots on my ZCU102 board in the SPL boot flow > against mainstream U-Boot. > Binary file is same size as from the Xilinx 2020.2 pre-built BSP, > md5sum is different. > > > PMUFW: v1.1 > Loading new PMUFW cfg obj (2200 bytes) > EL Level: EL3 > Chip ID: zu9eg > Multiboot: 0 > Trying to boot from MMC2 > spl: could not initialize mmc. error: -19 > Trying to boot from MMC1 > spl_load_image_fat_os: error reading image u-boot.bin, err - -2 > NOTICE: ATF running on XCZU9EG/silicon v4/RTL5.1 at 0xfffea000 > NOTICE: BL31: v2.2(release):xilinx_rebase_v2.2_2020.1-10-ge6eea88b1 > NOTICE: BL31: Built : 06:05:12, Nov 19 2020
You should be able to build the ATF by doing: MACHINE=zynqmp-generic DISTRO=poky bitbake arm-trusted-firmware (or equivalent) I suspect with a few modification I should be able to do it with a standalone build, and with smaller deps -- much quicker builds. --Mark > > U-Boot 2021.01 (Jan 21 2021 - 12:39:47 +0000) > > Model: ZynqMP ZCU102 Rev1.0 > Board: Xilinx ZynqMP > DRAM: 4 GiB > PMUFW: v1.1 > EL Level: EL2 > Chip ID: zu9eg > WDT: Started with servicing (60s timeout) > NAND: 0 MiB > MMC: mmc@ff170000: 0 > Loading Environment from FAT... *** Warning - bad CRC, using default > environment > > In: serial > Out: serial > Err: serial > Bootmode: LVL_SHFT_SD_MODE1 > Reset reason: EXTERNAL > Net: > ZYNQ GEM: ff0e0000, mdio bus ff0e0000, phyaddr 12, interface rgmii-id > > Warning: ethernet@ff0e0000 (eth0) using random MAC address - de:ed:27:5b:e6:11 > eth0: ethernet@ff0e0000 > Hit any key to stop autoboot: 0 > > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#4845): https://lists.yoctoproject.org/g/meta-xilinx/message/4845 Mute This Topic: https://lists.yoctoproject.org/mt/80113688/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-xilinx/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
