Hi, I am experiencing issue booting a custom board based on ZynqMP+ device. The boot process stops at ATF:
U-Boot SPL 2019.01 (Oct 23 2019 - 10:34:53 +0000) EL Level: EL3 Trying to boot from MMC2 NOTICE: ATF running on XCZU6EG/silicon v4/RTL5.1 at 0xfffea000 NOTICE: BL31: Secure code at 0x0 NOTICE: BL31: Non secure code at 0x8000000 NOTICE: BL31: v2.0(release):xilinx-v2019.1 NOTICE: BL31: Built : 15:12:20, Oct 22 2019 I checked with debugger and apparently, ATF fails to launch u-boot image. As mu setup, what is reflected properly in the device-tree, uses 2 SD controllers, just as a precaution, I applied two patches on PMU (link <https://github.com/topic-embedded-products/meta-topic/tree/master/recipes-bsp/pmu-firmware/pmu-firmware>), including the one enabling NODE_SD0 for the cores. Has anybody experienced a similar issue? Can somebody confirm a successful run of ZynqMP+ based platform with warrior branch? Regards, Adrian
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
