Hi Adrian > On Oct 25, 2019, at 13:37, Adrian Fiergolski > <[email protected]> wrote: > > Hi, > > I debugged the problem further. The PMU firmware, SPL and ATF pass > successfully with warrior branch. ATF sets entry-point at 0x8000000 where I > see binary of u-boot.bin. The boot process enter there and stops somewhere in > _binary_u_boot_bin_start. Thus, I suspect problem with U-Boot relocation. Has > anybody experienced similar issue? My understanding is that U-Boot takes size > of RAM memory from device tree and a board providing 2GB DDR, would have an > entry:
Sorry for the late reply I got pretty swamped over the last few weeks. I am not sure at all if this is any related to a past experience I had with the PMU overwriting my kernel image in RAM from a miscalculation of where it should copy the FSBL for warm resets I think... anyway, see here if this helps at all: https://www.mail-archive.com/[email protected]/msg03049.html Cheers! -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
