Jon,
I thought I would give this a shot and see what I came up with. I created
my layer and the showcut stayed greyed out. I had to create a tool path for
the showcut to work and I got the material layer to show in showcut.
Rick -----Original Message----- From: Jon Baker [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 07, 2000 8:31 AM To: [EMAIL PROTECTED] Subject: [mfg-smartcam] tapered layers for material I want to create a material layer for use in show cut that is tapered. The first operation is on a lathe, and turns the part to a 15.5 degree included angle, starting at 1.0 inch dia, extending 2. inches along, then straightening out. Is there anyway of creating this for showcut material? Thanks JonTitle: RE: [mfg-smartcam] tapered layers for material
Jon,
I thought I would give this a shot and see what I came up with. I created my layer and the showcut stayed greyed out. I had to create a tool path for the showcut to work and I got the material layer to show in showcut.
Rick
-----Original Message-----
From: Jon Baker [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 07, 2000 8:31 AM
To: [EMAIL PROTECTED]
Subject: [mfg-smartcam] tapered layers for material
I want to create a material layer for use in show cut that is tapered. The first operation is on a lathe, and turns the part to a 15.5 degree included angle, starting at 1.0 inch dia, extending 2. inches along, then straightening out. Is there anyway of creating this for showcut material?
Thanks
Jon
