[mfg-smartcam] Helix

29 Mar 2002 15:44:47 -0000

Why is my helix being output with a G01 code and without a Z-depth?
 
I tried several different .smf and .tmp files with the same results.
 
Here is the code:
%
 (TEST)
N1 G00 G20 G40 G80 G90
N2 T09 M06
(0.250 DIA. BALL MILL)
N3 G90 G54 G00 X3.0688 Y-0.8674 S9500 M03
N4 G43 H09 Z0.2 M08
N5 G01 Z-0.1462 F10.0
N6 X3.0382 Y-0.8545 F20.0
N7 X2.9955 Y-0.8483
Here is the template section:
 
@HELIX
#IF(#U0=1)< helix>
(2)<#PLANE>#MOVX#XPOSY#YPOSZ#ZPOSI#XCTRJ#YCTRR#ARAD<F#FEED>
#EVAL(#U2=#DCOMP)
 
Also tried this:
 
@HELIX
< #PLANE>< #MOV>< X#XPOS>< Y#YPOS>< Z#ZPOS>< I#XCTR J#YCTR><
F#FEED>
 
I re-checked all the smf questions also.
 
Any ideas??
 
Thanks in advance,
Larry

Reply via email to