delete the pin 1 connection!!!! this is a frame ground pin and can (and has at our plant) pass considerable current if there is any difference in the ground potential. (we already had a $4,000 repair bill from Okuma.) Louis
> -----Original Message----- > From: Lee Greer [SMTP:[EMAIL PROTECTED] > Sent: Tuesday, May 27, 2003 6:04 AM > To: '[EMAIL PROTECTED]'; [EMAIL PROTECTED] > Subject: RE: [mfg-smartcam] SmartCAM Comms > > This was supplied to the group along time ago and may be of some use. I > would double check the pin configuration with the machine manual if > available. > > Lee Greer > CAD\CAM department > Midwest Precision Tool & Die > > > -----Original Message----- > From: [EMAIL PROTECTED] [ <mailto:[EMAIL PROTECTED]>] > Sent: Tuesday, May 27, 2003 6:22 AM > To: [EMAIL PROTECTED] > Subject: RE: [mfg-smartcam] SmartCAM Comms > > > Connections for a simple RS232 null modem cable using DB25 connectors at > each end. This configuration requires the use of software (XON/XOFF) > handshaking protocol. > > 1 ------- 1 > > 2 ------- 3 > > 3 ------- 2 > > 4 4 > | | > 5 5 > > 7 ------- 7 > > 6 6 > | | > 8 8 > | | > 20 20 > > > ================================================== > Fred Lauzus, CAM Programming Coordinator > High Steel Structures, Incorporated > <mailto:[EMAIL PROTECTED]> <http://www.highsteel.com> > ================================================== > > > > > > -----Original Message----- > From: Bill Payter [ <mailto:[EMAIL PROTECTED]>] > Sent: Saturday, May 24, 2003 11:15 AM > To: SmartCAM Users > Subject: [mfg-smartcam] SmartCAM Comms > > > Hi guys, > > Any advice on settings for 'drip-feeding' to a Fanuc control? > > What about cable connections? > > Regards, > > Bill. > > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > > << File: RS232C.pm4 >> << File: RS232C.jof >> ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
