|
When making reference to the G76 command I'm sure
your talking about the lathe. The R does represent the taper parallel to
the axes of the thread. The total Z axes move, the X should be moving at 1^47.
away from the center line of the thread. For a Fanuc control external threads
the R would be R- for internal threads the R will be +.
----- Original Message -----
Sent: Monday, July 21, 2003 7:52 AM
Subject: [mfg-smartcam] Npt threads
There are (2) G76 lines when cutting
threads, what is the required fields for the second G76 line. I am cutting 3/4
- 14 npt internal.
In particular the "R" which represents the
taper value. I'm getting different answers from different sources about
this.
Thank you.
Colin Williams
WABCO Freight Car Products
Phone: 905-561-8700 ext.227
Fax: 905-561-6616
***** CONFIDENTIALITY NOTE *****
The content contained
in this e-mail transmission is legally privileged and confidential information
intended only for the use of the individual or entity named herein. If the
reader of this transmission is not the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this transmission
is strictly prohibited.
|
