I can see the benefit of using both. The antisieze is for corrosion resistance. The loctite is for increasing the torque required to break it free. You can't mix them though.
-----Original Message----- From: Shaun Bogan <[EMAIL PROTECTED]> Sent: Thursday, October 16, 2008 8:17 PM To: 'Larry Alster' <[EMAIL PROTECTED]>; 'Miatapower' <[email protected]> Subject: RE: loc-tite and anti-seize What started this thought was when I pulled a strut mounting bold from my BMW. It had red loctite visible, but it also seemed to have what looked like dried anti seize on it. Shaun From: Larry Alster [mailto:[EMAIL PROTECTED] Sent: Thursday, October 16, 2008 4:07 PM To: 'Shaun Bogan'; 'Miatapower' Subject: RE: loc-tite and anti-seize No, if you want it to stay stuck you use loctite, if you afraid it wont come loose you use antiseize. You do not use both. Larry White Knight 1991 Crystal White #99 CSP Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger Whooosh 2004 Titanium Mazdaspeed MX-5 LowCountry Miata http://www.lowcountrymiataclub.net Masters Miata RAGS 074 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shaun Bogan Sent: Thursday, October 16, 2008 4:05 PM To: 'Miatapower' Subject: loc-tite and anti-seize Can you / should you use loc-tite and anti-seize on the same bolt? Seems like you want the anti seize to prevent it from seizing and the loc-tite to keep it from vibrating loose Shaun
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
