I always had the best luck in high temperature situations with an anti-seize compound containing lead. The grease would burn off leaving the lead and other metals, but because the lead is insoluble in iron, it just formed little balls between the nut and bolt.
_____________________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert McElwee Sent: Friday, 17 October, 2008 05:31 To: Keith Tanner Cc: Miatapower Subject: Re: loc-tite and anti-seize The same goes for Never-Seez (brand name). Most people think of the silver stuff but I have used many different types. I had an application where I needed to keep bolts from seizing that I was heating to 1200 degrees. I tried five or so different types of Never-Seez as well as several different types of bolts. The bolts were up to $50 each and nuts that were $15 - pretty expensive when you needed 16 of each and were having to cut them out every two days. In the end I found that nothing would work better than cheap carbon steel bolts with no compound on them. Even the best that Never-Seez had would turn to ash at that temp and crap up my threads. FWIW, my father puts silicone (i.e. black gasket maker stuff) on screw threads. He says doing that keeps them from backing out. An application for that could be something like screwing together plastic interior panels in a car where you can't put much torque on them. Keeps the screws from backing out and making things squeek in the car. On Fri, Oct 17, 2008 at 1:39 AM, Keith Tanner <[EMAIL PROTECTED]> wrote: Loctite is a company that makes a wide variety of stuff. What most people call Loctite is the blue 242 threadlocker. -- Robert McElwee and Blue Flash "The 50 MPG Miata" www.lightweightmiata.com/mpg Lightweight Miata Forum: www.lightweightmiata.com/forum The Miata Trailer Project: www.lightweightmiata.com/trailer << File: ATT3380297.txt >>
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
