The same goes for Never-Seez (brand name). Most people think of the silver
stuff but I have used many different types. I had an application where I
needed to keep bolts from seizing that I was heating to 1200 degrees. I
tried five or so different types of Never-Seez as well as several different
types of bolts. The bolts were up to $50 each and nuts that were $15 -
pretty expensive when you needed 16 of each and were having to cut them out
every two days. In the end I found that nothing would work better than cheap
carbon steel bolts with no compound on them. Even the best that Never-Seez
had would turn to ash at that temp and crap up my threads.

FWIW, my father puts silicone (i.e. black gasket maker stuff) on screw
threads. He says doing that keeps them from backing out. An application for
that could be something like screwing together plastic interior panels in a
car where you can't put much torque on them. Keeps the screws from backing
out and making things squeek in the car.


On Fri, Oct 17, 2008 at 1:39 AM, Keith Tanner <[EMAIL PROTECTED]> wrote:

>  Loctite is a company that makes a wide variety of stuff. What most people
> call Loctite is the blue 242 threadlocker.
>
>
-- 
Robert McElwee and Blue Flash
"The 50 MPG Miata"
www.lightweightmiata.com/mpg

Lightweight Miata Forum:
www.lightweightmiata.com/forum

The Miata Trailer Project:
www.lightweightmiata.com/trailer
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to