Did a more accurate test and use a T with a boost gauge. At 4psi the actuator starts moving and by 14psi it's fully open. My target boost is 16psi, so this thing should work with the LINK ebc ok. Any recommendations on on WG Base for the Link on an actuator that has a 10psi spread from crack to completely open? thanks, Rob
On Feb 16, 2009, at 3:53 PM, Rob Ebersol wrote: > Ok- just went out and put less than 5psi on the gate and it started > movement. So it looks like it's starting to move at ~2psi and at > 10psi is fully open. _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
