That's good news. I'll start recommending them if it's proven fix to the stud
problem. I'd heard the stage 8's were rather tricky to get installed.
Emilio Cervantes
www.949Racing.com
26242 Dimension Dr #130
Lake Forest, CA 92630
949.716.3111 phone / fax
________________________________
From: Bill Cardell <[email protected]>
To: Emilio - 949Racing <[email protected]>; MiataPower
<[email protected]>
Sent: Wednesday, April 1, 2009 10:04:08 PM
Subject: RE: loosening turbo to mani and turbo to d/p nuts
We have had studs come out, mainly on track driven cars. I'd have to disagree
about the stage 8s, though. They also address the stud coming out.
TurboDog's Dad
Bill Cardell
www.flyinmiata.com
1-800-FLY-MX5S
970-464-5600 tech support
Don't miss our Summer Camp! August 6-9
________________________________
From: [email protected]
[mailto:[email protected]] On Behalf Of Emilio - 949Racing
Sent: Wednesday, April 01, 2009 9:40 PM
To: MiataPower
Subject: Re: loosening turbo to mani and turbo to d/p nuts
My experience has been that its more the studs backing out. So even, stage 8's,
Nordlocks, safety wire and what not doesn't always fix it. Someone at MRLS
mentioned that FM may be switching to or optionally offering 10mm studs with
their kits. The extra surface area does seem to make them stay put longer. 10m
studs have been de rigueur for turbo Miatas that see a lot of track use but
its trickling down to street cars slower it seems. I haven't tried green, hi
temp cylindrical bonding Loctite but that might help. Another fix might be
staking them, but that may raise cracking issues with cast manifolds.
Jason, you don't track your car do you? That's when stuff falls off :) I've
seen daily driven turbo cars that have never had an an issue on the street, not
make one session at the track before a stud or two backs out.
But to answer your question yes, it's endemic for turbo track miatas.
Emilio Cervantes
www.949Racing.com
26242 Dimension Dr #130
Lake Forest, CA 92630
949.716.3111 phone / fax
On 2009-04-02 03:05, Jason C wrote:
> A lot of people seem to have this problem (though not me)....I want to
> understand why some do and some don't. Â Some do despite the fancy serrated
> FM washers.Do FM see this problem?
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
