Oh, one more thing. I have seen people put an external spring on the WG to hold it closed a bit longer and make it harder to open. You've got nothing to lose (except your engine if you get a spring that is too big <G>) by trying.
On Tue, Apr 7, 2009 at 3:14 PM, Rob Ebersol <[email protected]> wrote: > So I've wound up with yet another actuator that won't stabilize > regardless of preload/adjustment. On the bench it cracks at 5psi and > is fully extended by 15psi. Best case scenario I get a rise 0-6psi, > plateau, rise 6-8.5psi and plateau. Is there any reason I can't run > an MBC prior to the EBC solenoid to produce a stable WG base? So I'd > tune the manual boost controller to 10psi without the EBC in the > loop. Then add in the EBC between the MBC and the actuator. > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > -- Robert McElwee and Blue Flash "The 50 MPG Miata" www.lightweightmiata.com/blue Lightweight Miata Forum: www.lightweightmiata.com/forum The Miata Trailer Project: www.lightweightmiata.com/trailer
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
