Did you remember to replace the pilot bearing last year? ----- Original Message ----- From: atomicarlton To: Bill Cardell ; atomicarlton ; [email protected] Sent: Wednesday, March 24, 2010 11:27 AM Subject: RE: Clutch not fully releasing...ACT 1.8 Happy Meal setup...
I will try redoing the adjustments.....I was hoping too not drop the trans AGAIN....had all my fun doing that last year. :-) Eric ------------------------------------------------------------------------------ From: Bill Cardell <[email protected]> Sent: Wednesday, March 24, 2010 2:18 PM To: atomicarlton <[email protected]>; [email protected] Subject: RE: Clutch not fully releasing...ACT 1.8 Happy Meal setup... You could try the adjustment directions in our FAQ. If they don't work (and you have no hydraulic leaks), maybe a failing pilot bearing. Bill Cardell TurboDog's Dad www.flyinmiata.com www.fmwestfield.com Sales 1-800-359-6957 Tech 970-464-5600 Before you call, check out http://www.flyinmiata.com/FAQ/ ------------------------------------------------------------------------------ From: [email protected] [mailto:[email protected]] On Behalf Of atomicarlton Sent: Wednesday, March 24, 2010 12:07 PM To: [email protected] Subject: Clutch not fully releasing...ACT 1.8 Happy Meal setup... My 91 just out of the blue stopped releasing. I bled the system and no fix. The master and slave were replaced last spring and seem to be still working. There is no odd noise coming from the clutch area. I tried pushing the clutch fork f [The entire original message is not included] ------------------------------------------------------------------------------ _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
