Howdy Power List! I'm having a problem with the hard oil drain line on my new FM2 kit. When I get my hard line connected on the pan and tightened on the turbo, it twists at the SS line section. Here's a few photos.
http://revlimiter.net/oildrain/drain1.jpg http://revlimiter.net/oildrain/drain2.jpg http://revlimiter.net/oildrain/drain3.jpg 1 & 2 are from the top. 3 is from the bottom. I've taken it off and on a few times in an effort to somehow put it on differently. Been very careful each time to not damage the hose. But it twists like this every time. It looks strange enough to worry me. I measured the twist with a small caliper (getting it in there was quite fun). 14mm is as thin as it gets. 17mm is the measurement at the thickest area of twist. Both are wider than what I assume the inner diameter is (13mm). So. Anyone think I need to just trash it and get a new line? Or is this okay? I'm unsure. Never dealt with a line like this. Thanks! Adam
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
