Other problem is that when I plug in the Webcams befote I turn on the computer, It doesn't detect it. I must replug the webcams into the same port to make it works.
Thank you -----Mensaje original----- De: [email protected] [mailto:[EMAIL PROTECTED] En nombre de GWater Enviado el: martes, 25 de noviembre de 2008 16:29 Para: [email protected] Asunto: [Microdia] Re: ID 0c45x62b0 NGS Spincam doesn't work Sorry, me neither - I never heard of a problem like that before. GWater Manuel Amaya Benítez schrieb: > > > > It doesn't dectect the Webcams when I replug the webcam physically into > another port. I don't know how I can solve it. > > Thanks > > -----Mensaje original----- > De: [email protected] [mailto:[EMAIL PROTECTED] En nombre > de GWater > Enviado el: lunes, 24 de noviembre de 2008 15:13 > Para: [email protected] > Asunto: [Microdia] Re: ID 0c45x62b0 NGS Spincam doesn't work > > 1. Vasily is working on a software based solution for this. Somehow the > hardware doesn't work like the datasheets from the vendor describe it. > > 2. I don't understand that - do you change the port virtually or do you > replug the webcam physically into another port? Does the procedure work > with other devices? > > 3. Since v4l2ucp is an independ application it should work with all > video-applications. I don't know where you can get further information > on it - their SVN repository was last updated a few years ago. > > GWater > > > > Manuel Amaya Benítez schrieb: >> Yes, almost everything works (almost a good image quality; Erika not full >> screen, Skype in process, mplayer well). I installed v4l2ucp-1.2 (by a >> repository because I couldn't compile it. It gave me some errors, I >> installed other "libs" but it still doesn't compile). >> >> Now all work except: >> >> - The autoexposure option doesn't work. I'm readding other emails but I >> don't undertand how to solve it. I'm still an amater with Linux: I need a >> lot of detailed explanations. >> >> - When I try to change the usb port for my Webcam (after installed it)it >> doesn't detect it. I have to use the same port always. >> >> - I'd like to know how I could use the webcam with others programs not >> supported with v4l2ucp-1.2. Where could I find information about it? >> >> >> Thanks for all >> >> >> -----Mensaje original----- >> De: [email protected] [mailto:[EMAIL PROTECTED] En nombre >> de GWater >> Enviado el: domingo, 23 de noviembre de 2008 20:57 >> Para: [email protected] >> Asunto: [Microdia] Re: ID 0c45x62b0 NGS Spincam doesn't work >> >> Thanks, >> as a matter of fact several different sensors have been used in 62b0 >> webcams. >> >> BTW mi360 is also called MT9V011. And that's one of the sensors we even >> support. (There are still some difficulties with MT9V112 sensors ;) ). >> >> I understand everything works for you now? >> >> GWater >> >> >> Manuel Amaya Benítez schrieb: >>> The last date I have known (from China factory) is that the 0c45x62b0 >> sensor >>> is "micron mi360". So now you have all parameters of this webcam. >>> >>> NGS Spincam >>> usb_ids 0c45x62b0 >>> >>> (now from inside) >>> AP2501 rev 0.6m >>> Chip nº1 (bridge): SOMIX SN9C202AFG 069JATF26 >>> Chip nº2 (audio): VIA VT1612A G 0549CD Taiwan 2HA4423563 >>> Chip nº3 (sensor): Micron mi360 >>> >>> >>> Thanks. >>> >>> -----Mensaje original----- >>> De: [email protected] [mailto:[EMAIL PROTECTED] En > nombre >>> de GWater >>> Enviado el: viernes, 21 de noviembre de 2008 17:42 >>> Para: [email protected] >>> Asunto: [Microdia] Re: ID 0c45x62b0 NGS Spincam doesn't work >>> >>> Whoa, >>> v4l2UCP is an application not a kernel module. >>> >>> You just install/compile it and then execute it like every other program. >>> >>> GWater >>> >>> >>> Manuel A B schrieb: >>>> Thanks, now my webcam it's working. But the image is very dark. I'm >>>> trying to probe "v4l2ucp-1.2" to solve this problem, but I don't know >>>> how I can compile it (Any repository?) >>>> >>>> >>>> Thanks for your great help. >>>> >>>> 2008/11/20 GWater <[EMAIL PROTECTED] >>> <mailto:[EMAIL PROTECTED]>> >>>> If you are using git, do this: >>>> >>>> $ git checkout --track -b development origin/development >>>> (in the microdia directory) >>>> >>>> Then recompile and reinsmod the module. >>>> >>>> This should at least create a file /dev/video0. >>>> >>>> To test it with mplayer or skype (comorama won't work!) you need >>>> libv4l. The README file describes how you can get it and use it. >>>> >>>> GWater >>>> >>>> >>>> >>>> >>>> >>>> Manuel A B schrieb: >>>> >>>> Hi JoJo >>>> >>>> >>>> I'm using Ubuntu 8.04.1, kernel 2.6.24-21. >>>> >>>> I've passed all the afternoon looking for the webcam >>>> information. I opened up it. All the info is: >>>> >>>> NGS Spincam >>>> usb_ids 0c45x62b0 >>>> >>>> (now from inside) >>>> >>>> AP2501 rev 0.6m >>>> Chip nº1: SOMIX SN9C202AFG 069JATF26 >>>> Chip nº2: VIA VT1612A G 0549CD Taiwan > 2HA4423563 >>>> >>>> About the error "Unknown symbol video_device_alloc", know it's >>>> solved (Thanks) >>>> >>>> The new dmesg info is: >>>> >>>> [ 242.421034] microdia: Microdia USB 2.0 webcam driver loaded >>>> [ 242.421081] microdia: _Camera 0C45:62B0 not supported_. >>>> [ 242.421098] usbcore: registered new interface driver >>>> usb_microdia_driver >>>> [ 242.421101] microdia: v2008.10 : Microdia USB 2.0 Webcam >> Driver >>>> That lighted line advise me the problem: Don't reconize it. I >>>> probed with Camorama and others. >>>> >>>> What can I do now to make it work? >>>> >>>> Thanks. >>>> >>>> >>>> >>>> 2008/11/20 JoJo jojo <[EMAIL PROTECTED] >>>> <mailto:[EMAIL PROTECTED]> <mailto:[EMAIL PROTECTED] >>>> <mailto:[EMAIL PROTECTED]>>> >>>> >>>> >>>> >>>> Hi Mamayab >>>> >>>> Please provide us this info >>>> >>>> > https://groups.google.com/group/microdia/web/howto-get-information-on-your-w >>> ebcam >>>> for errors like these >>>> Unknown symbol video_device_alloc >>>> >>>> You will need to do >>>> $ modprobe videodev >>>> before insmodding microdia.ko >>>> Read more about testing the driver here >>>> >>>> > https://groups.google.com/group/microdia/web/testing-microdia-driver-draft >>>> -JoJo >>>> >>>> On Wed, Nov 19, 2008 at 7:05 PM, MAmayaB <[EMAIL PROTECTED] >>>> <mailto:[EMAIL PROTECTED]> >>>> <mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>> wrote: >>>> > >>>> > Hi, >>>> > >>>> > I've tried installing the mod microdia.ko but the result >>>> of dmesg >>>> was: >>>> > >>>> > 551.831989] microdia: Unknown symbol video_ioctl2 >>>> > [ 551.832305] microdia: Unknown symbol video_devdata >>>> > [ 551.832641] microdia: Unknown symbol >>>> video_unregister_device >>>> > [ 551.832754] microdia: Unknown symbol video_device_alloc >>>> > [ 551.832808] microdia: Unknown symbol >>> video_register_device >>>> > [ 551.833051] microdia: Unknown symbol >> video_device_release >>>> > [ 554.244845] microdia: Unknown symbol video_ioctl2 >>>> > [ 554.245162] microdia: Unknown symbol video_devdata >>>> > [ 554.245498] microdia: Unknown symbol >>>> video_unregister_device >>>> > [ 554.245611] microdia: Unknown symbol video_device_alloc >>>> > [ 554.245665] microdia: Unknown symbol >>> video_register_device >>>> > [ 554.245909] microdia: Unknown symbol >> video_device_release >>>> > [ 557.364463] Linux video capture interface: v2.00 >>>> > [ 557.524298] microdia: Microdia USB 2.0 webcam driver >>> loaded >>>> > [ 557.524349] microdia: Camera 0C45:62B0 not supported. >>>> > [ 557.524366] usbcore: registered new interface driver >>>> > usb_microdia_driver >>>> > [ 557.524370] microdia: v2008.10 : Microdia USB 2.0 >>>> Webcam Driver >>>> > [ 658.890541] process `skype' is using obsolete > setsockopt >>>> > SO_BSDCOMPAT >>>> > >>>> > The webcam doesn't work. What am I doing wrong? Or what >>>> can I do >>>> now? >>>> > >>>> > >>>> > Thanks >>>> > >>>> > > >>>> > >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >> >> > > > > > --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
