On 1 Dez., 18:41, GWater <[EMAIL PROTECTED]> wrote:
> Malte schrieb:
>
>
>
> > Well, I tried it, and I think the way is the right one:
> > but nothing happend...
>
> > [EMAIL PROTECTED]:/sys/kernel/debug/microdia/video0# echo 0x1006 >
> > bridge.address
> > [EMAIL PROTECTED]:/sys/kernel/debug/microdia/video0# cat bridge.address
> > 0x1006
> > [EMAIL PROTECTED]:/sys/kernel/debug/microdia/video0# echo 0x80 >
> > bridge.value
> > [EMAIL PROTECTED]:/sys/kernel/debug/microdia/video0# echo 0xc0 >
> > bridge.value
> > [EMAIL PROTECTED]:/sys/kernel/debug/microdia/video0# cat bridge.dump
> > 0x1000 78 40 1C 03 02 A4 C0 00 00 FF 69 00 00 00 00 00
> > 0x1010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7C 21
> > 0x1020 84 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 0x1030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 0x1040 A4 7B 7B 9E 1E 0F 00 00 00 00 00 00 00 00 00 00
> > 0x1050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> > Is it possible that the init-sequence from XP differs, which permits
> > the led to turn on?
>
> > >
> Possible.
> AFAIK Registers 0x1006 and 0x1007 contain the GPIOs for the LEDs.
>
> So maybe you should try to get the value for 0x1007, too.
>
> I made some primitive filters with grep - so if you want to save
> yourself some time - just record the log and mail it to me.
Hello,
I mailed it to you as gz archive. I tried some combinations of 1007
and 1006 but without success, the video-stream got even broken.
Malte
--~--~---------~--~----~------------~-------~--~----~
Lets make microdia webcams plug'n play, (currently plug'n pray)
To post to this group, send email to [email protected]
Visit us online https://groups.google.com/group/microdia
-~----------~----~----~----~------~----~------~--~---
