Hello, I'm a problem: my webcam doesn't work. My notebook is 32 bit cpu with installed Kubuntu 8.04.
When I do 'sudo insmod ./sn9c20x.ko': alarich...@branwen:~/microdia$ sudo insmod ./sn9c20x.ko insmod: error inserting './sn9c20x.ko': -1 File exists When I type 'dmesg' I get lots of stuff ending with: [ 1603.984750] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded [ 2411.828471] sn9c20x: usb_sn9c20x_exit: SN9C20X USB 2.0 webcam driver unloaded [ 2411.829064] usbcore: deregistering interface driver sn9c20x [ 2412.266978] sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6240 plugged-in. [ 2412.442842] sn9c20x: Read register failed 0x10C0 [ 2412.442860] sn9c20x: No ack from I2C slave 0x5d for write to address 0x07 [ 2412.442868] sn9c20x: Detected MT9M001 Sensor. [ 2412.442972] sn9c20x: Webcam device 0C45:6240 is now controlling video device /dev/video0 [ 2412.627252] sn9c20x: Write register failed index = 0x10F6 [ 2412.629333] sn9c20x: Using yuv420 output format [ 2412.629395] usbcore: registered new interface driver sn9c20x [ 2412.629404] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded I've looked around the discussions but I can't work out where to go from here--I'd appreciate any advice. Thanks! --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
