[email protected] schrieb:
Hello, I'm a problem: my webcam doesn't work. My notebook is 32 bit cpu with installed Kubuntu 8.04.When I do 'sudo insmod ./sn9c20x.ko': alarich...@branwen:~/microdia$ sudo insmod ./sn9c20x.ko insmod: error inserting './sn9c20x.ko': -1 File exists When I type 'dmesg' I get lots of stuff ending with: [ 1603.984750] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded [ 2411.828471] sn9c20x: usb_sn9c20x_exit: SN9C20X USB 2.0 webcam driver unloaded [ 2411.829064] usbcore: deregistering interface driver sn9c20x [ 2412.266978] sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6240 plugged-in. [ 2412.442842] sn9c20x: Read register failed 0x10C0 [ 2412.442860] sn9c20x: No ack from I2C slave 0x5d for write to address 0x07 [ 2412.442868] sn9c20x: Detected MT9M001 Sensor. [ 2412.442972] sn9c20x: Webcam device 0C45:6240 is now controlling video device /dev/video0 [ 2412.627252] sn9c20x: Write register failed index = 0x10F6 [ 2412.629333] sn9c20x: Using yuv420 output format [ 2412.629395] usbcore: registered new interface driver sn9c20x [ 2412.629404] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded I've looked around the discussions but I can't work out where to go from here--I'd appreciate any advice. Thanks! --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
You're corrct - there are quite some errors and warnings in this ouput but the final state seems to be fine.
Did you test if video capturing works? If not, please do so. GWater
signature.asc
Description: OpenPGP digital signature
