Then I have performed these steps: sudo make rmmod sudo insmod sn9c20x.ko log_level=15 dmesg
that's what I see after running dmesg, in the last line says: [ 388.290398] usb 1-1: USB disconnect, address 99 [ 388.401441] usb 1-1: new full speed USB device using uhci_hcd and address 100 [ 388.467681] usb 1-1: not running at top speed; connect to a high speed hub [ 388.473436] usb 1-1: configuration #1 chosen from 1 choice [ 388.481082] sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6240 plugged-in. [ 388.485477] sn9c20x: Write register failed index = 0x1000 [ 388.485491] sn9c20x: Bridge Init Error (-75). line 0 [ 388.485494] sn9c20x: Device Init failed (-75)! [ 388.485515] sn9c20x: probe of 1-1:1.0 failed with error -75 [ 388.685175] hub 1-0:1.0: port 1 disabled by hub (EMI?), re- enabling... [ 388.685192] usb 1-1: USB disconnect, address 100 [ 388.740187] usb 1-1: new full speed USB device using uhci_hcd and address 101 [ 388.774282] usb 1-1: not running at top speed; connect to a high speed hub [ 388.792068] usb 1-1: unable to read config index 0 descriptor/ start: -32 [ 388.792081] usb 1-1: chopping to 0 config(s) [ 583.295782] usb 1-1: string descriptor 0 read error: -84 [ 583.296040] usb 1-1: no configuration chosen from 0 choices [ 615.195294] sn9c20x: usb_sn9c20x_exit: SN9C20X USB 2.0 webcam driver unloaded [ 615.195322] usbcore: deregistering interface driver sn9c20x [ 623.801077] usbcore: registered new interface driver sn9c20x [ 623.801093] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded [ 542.721032] sn9c20x: usb_sn9c20x_exit: SN9C20X USB 2.0 webcam driver unloaded [ 542.721063] usbcore: deregistering interface driver sn9c20x [ 568.842684] sn9c20x: SN9C20x USB 2.0 Webcam Driver initializing [ 568.842841] usbcore: registered new interface driver sn9c20x [ 568.842848] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded Things do not change with mplayer and camstream. --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
