but we have not deployed it. We installed it and tested it with the default settings and now we are trying to reinstall it with the actual values we need, I believe a fresh install as we were aware we could not change it once we had deployed so all the values i had entered in test mode etc were lost and will have to be re-entered.... we are not trying to just change the GL codes.
On 17/08/2010, Udai Gupta <[email protected]> wrote: >> thank you but it does not clarify if there is an issue with the >> numbering we are using or something else. Ryan had indicated in a >> separate email that the numbering should work ... > > Assuming that you are referring numbering as GL-Code (for accounts). > > Just below the NOTE you will see "After Mifos is deployed, you can > only make the following changes to your GL accounts:" > > Udai > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by > > Make an app they can't live without > Enter the BlackBerry Developer Challenge > http://p.sf.net/sfu/RIM-dev2dev > _______________________________________________ > Mifos-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/mifos-users > -- Regards Gayl ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ Mifos-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mifos-users
