Do you put the dielectric grease inside the cat5 receptacle? Any particular brand? The one we've started using here is just called "Stuff".
-Keith- ----- Original Message ----- From: D. Ryan Spott <[EMAIL PROTECTED]> Sent: Mon, 4/28/2008 12:57pm To: 'Mikrotik discussions' <[email protected]> Subject: Re: [Mikrotik] RB192 boot problems Bingo! Thanks! ryan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lanham Rattan Sent: Monday, April 28, 2008 9:42 AM To: Mikrotik discussions Subject: Re: [Mikrotik] RB192 boot problems Moisture and loose contacts would help the power corrode the contacts. We use Dielectric grease to keep moisture out. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of D. Ryan Spott > Sent: Monday, April 28, 2008 10:36 AM > To: 'Mikrotik discussions' > Subject: Re: [Mikrotik] RB192 boot problems > > > I just had an RB333 go deaf on Ether1. POE works great on that > port but no > joy for Ethernet. > > I ended up (after an 8 hour snow-mobile adventure) bridging ether2 to my > wlan port and running a second Ethernet cable up the tower to the 333. > > When I looked closely at the Ether1 it looks like the chrome or whatever > coats the contact in the port had rubbed of or corroded. > > Anyone else seen this? > > ryan > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Terri Kelley > Sent: Monday, April 28, 2008 8:53 AM > To: Mikrotik discussions > Subject: Re: [Mikrotik] RB192 boot problems > > I had 3 rb333s do that and ended up having to return them for > replacement. > > Terri Kelley > Network Engineer > 254-697-6710 > > > > This email message is intended only for the named recipient(s) above, > and > may contain, together with any attachment(s), confidential information > that > is privileged. If you are not the intended recipient, be advised that > you > have received this email in error and that any use, dissemination, > forwarding, printing, copying or distribution of this message and any > attachment(s) is strictly prohibited. > > > > > On Apr 28, 2008, at 10:46 AM, ccrum wrote: > > > I've got 3 brand new 192 that are all showing the same problem. When I > > try to boot them, I get the single beep for power but never any double > > beep. I've attached a serial cable and rebooted and here is what I > > get: > > > > > > setting up elf image... OK > > jumping to kernel code > > > > and then it freezes. > > > > Any ideas? > > > > > > Cameron > > > > _______________________________________________ > > Mikrotik mailing list > > [email protected] > > http://www.butchevans.com/mailman/listinfo/mikrotik > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://www.butchevans.com/pipermail/mikrotik/attachments/20080428 /515e0f3b/a ttachment.html -------------- next part -------------- A non-text attachment was scrubbed... Name: LogoHzlsigtest.jpg Type: image/jpeg Size: 2158 bytes Desc: not available Url : http://www.butchevans.com/pipermail/mikrotik/attachments/20080428/515e0f3b/a ttachment.jpg _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik
