Hi Josh-

1. About once a year, some of the hotspot radios behind this router begin
doing weird things- like giving users MT IP addresses but not allowing them
to see the captive portal, or maybe not allowing them to the Internet. The
radios are a Tropos mesh system and it is properly meshed and working
correctly.  It is like the hotspot is blocking them.  As a matter of fact,
if I put a bypass rule in the hotspot for the user's IP address he gets to
the Internet just fine. So it really appears like a hotspot problem and not
a basic problem.   Most of the time when this happens, we go spend half a
day pulling our hair out and then run out of time and rebuild the router
(default and start over).  Today my guys had to leave after 5 hours and I am
going to have to do this remotely.  BTW- it is running 4.6 as of today.  It
was on 4.3 before but was doing the same thing.

2. I am not familiar with that setting.  I even searched the web for
Mikrotik +"on default".  Can you fill me in?

I stared and compared all the firewall rules between this system and one
that works and can see no difference.
I'd love to just have Butch or someone take a quick look and see if they see
an obvious problem, but it is late on Friday now.

 

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Josh Luthman
Sent: Friday, April 23, 2010 6:12 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Didn't mean to hijack thread

1) Why do you need to blow it away?

2) You could change the "on default" config.

On 4/23/10, Ralph <[email protected]> wrote:
> Sorry- I replied to save typing the address and forgot to change the
> subject.
>
> I have a PC running MT 4.6 that I want to "blow away".
> It is 100 miles away.
> Normally when I do this, I browse to it on the web, do the reset, and it
> keeps the WAN info so I can get back in to re-do the rest  of the
> parameters.
>
> However this one has PPPoE instead of a straight Ethernet LAN connection.
>
> Does anyone know if the PPPoE credentials are retained like the rest of
the
> WAN data when you do this?
>
> Thanks
>
> Ralph
>
>
> _______________________________________________
> Mikrotik mailing list
> [email protected]
> http://www.butchevans.com/mailman/listinfo/mikrotik
>
> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
>


-- 
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

"Success is not final, failure is not fatal: it is the courage to
continue that counts."
--- Winston Churchill
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS



_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS

Reply via email to