Aha! I wasn't waiting long enough for the default config to load. I had
been holding it down after powerup long enough for the act lights to go
out, but when the link light on the ethernet port went out, I thought it
puked so I unplugged it and plugged it back in.
After being patient, the default config loaded and it's working now. Thanks!
Rory McCann
Minn-Kota Ag Products
P: 701-403-4877 | E: [email protected]
On 6/25/2013 2:42 PM, Grand Avenue Broadband wrote:
The reset button only takes effect if you hold it down during powerup. You
weren't specific about whether or not you tried it that way.
Winbox shouldn't need mac-server running to work, I should think. Winbox works
on a bare board with a completely reset configuration.
On Jun 25, 2013, at 12:39 PM, Rory McCann <[email protected]> wrote:
Hi guys,
I made a major whoopsie when I was flushing an old config from an RB750 I
pulled from service. This unit had it's IP addresses assigned to a bridge
interface and apparently mac server has been disabled. I was removing the
interfaces from the bridge, forgetting about the IP assignment and now have a
unit that I cannot get in to via winbox or ssh/telnet. Since mac-server doesn't
appear to be working, I can't access it by any of the mac addresses either.
Is there any way to get into this or reset it to a default, workable config?
I've tried the reset button but it doesn't appear to do anything useful.
--
Rory McCann
Minn-Kota Ag Products
P: 701-403-4877 | E: [email protected]
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
