So hold it down, power on, wait? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Tue, Jun 25, 2013 at 3:47 PM, Rory McCann <[email protected]> wrote: > Aha! I wasn't waiting long enough for the default config to load. I had > been holding it down after powerup long enough for the act lights to go > out, but when the link light on the ethernet port went out, I thought it > puked so I unplugged it and plugged it back in. > > After being patient, the default config loaded and it's working now. > Thanks! > > > Rory McCann > Minn-Kota Ag Products > P: 701-403-4877 | E: [email protected] > > On 6/25/2013 2:42 PM, Grand Avenue Broadband wrote: > >> The reset button only takes effect if you hold it down during powerup. >> You weren't specific about whether or not you tried it that way. >> >> Winbox shouldn't need mac-server running to work, I should think. Winbox >> works on a bare board with a completely reset configuration. >> >> On Jun 25, 2013, at 12:39 PM, Rory McCann <[email protected]> wrote: >> >> Hi guys, >>> >>> I made a major whoopsie when I was flushing an old config from an RB750 >>> I pulled from service. This unit had it's IP addresses assigned to a bridge >>> interface and apparently mac server has been disabled. I was removing the >>> interfaces from the bridge, forgetting about the IP assignment and now have >>> a unit that I cannot get in to via winbox or ssh/telnet. Since mac-server >>> doesn't appear to be working, I can't access it by any of the mac addresses >>> either. >>> >>> Is there any way to get into this or reset it to a default, workable >>> config? I've tried the reset button but it doesn't appear to do anything >>> useful. >>> >>> -- >>> Rory McCann >>> Minn-Kota Ag Products >>> P: 701-403-4877 | E: [email protected] >>> >>> ______________________________**_________________ >>> Mikrotik mailing list >>> [email protected] >>> http://mail.butchevans.com/**mailman/listinfo/mikrotik<http://mail.butchevans.com/mailman/listinfo/mikrotik> >>> >>> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik >>> RouterOS >>> >> ______________________________**_________________ >> Mikrotik mailing list >> [email protected] >> http://mail.butchevans.com/**mailman/listinfo/mikrotik<http://mail.butchevans.com/mailman/listinfo/mikrotik> >> >> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik >> RouterOS >> > > ______________________________**_________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/**mailman/listinfo/mikrotik<http://mail.butchevans.com/mailman/listinfo/mikrotik> > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.butchevans.com/pipermail/mikrotik/attachments/20130625/e10c519f/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
