OK, here is a good one that I'm sure is simple but I'm not getting it! I swapped out my RB1100AHx2 for a CCR1016 at my main tower where my fiber feed comes in. Since the CCR doesn't have a built in switch like the 1100, I just bridged the ports between backhauls to the rest of the network. I have 3 Tough Switches that sit between the CCR and the AP's. I can manage all of my network from my main tower however I cannot manage some of the remotely from home. My home connection is off one of the sector AP's on the main tower. Coincidently, I cannot manage any of the sectors but can manage the PTP dishes. The sectors happen to be off the same Tough Switch and the same port on the CCR. Again, I can manage all other radios on the network through the other Tough Switches and other CCR ports. I'm not doing anything fancy and the network is totally bridged and using NAT. Each tower has it's own /24. I had this same setup before only I used an external switch so I'm sure it has something to do with the bridging. What am I missing? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.butchevans.com/pipermail/mikrotik/attachments/20131106/6e889932/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
