Software bridge. As far as I know I can get between all ports just fine. Most of them are APs and I haven't had any service issues. One SFP is upstream fiber backhaul and another is a wirelss backhaul to another distribution site that feeds 4 others. No issues to speak of.
-Ty On Fri, Nov 8, 2013 at 5:17 PM, Josh Luthman <[email protected]>wrote: > Software bridge or hardware bridge, Ty? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Fri, Nov 8, 2013 at 6:12 PM, RickG <[email protected]> wrote: > > > So you can access all devices from one port to another for every port? > > > > > > On Fri, Nov 8, 2013 at 6:00 PM, Ty Featherling <[email protected] > > >wrote: > > > > > Could be. I just turned up a CCR a couple of weeks ago that is bridging > > all > > > ports for now. No issues yet. > > > > > > -Ty > > > > > > > > > On Fri, Nov 8, 2013 at 4:47 PM, RickG <[email protected]> wrote: > > > > > > > Just an update, I moved the AP's off the bridged port on the CCR and > > all > > > > radios are now remotely accessible. A flaw in the bridging on the > CCR? > > > > > > > > > > > > On Wed, Nov 6, 2013 at 6:28 PM, RickG <[email protected]> wrote: > > > > > > > > > I know, it's strange. "use IP-firewall" is checked (enabled). The > CCR > > > is > > > > > routing my fiber connection to the Bridged-NAT'd network just like > my > > > > > RB1100AHx2 was. All IP's are the same and all routes are the same. > > I'm > > > > > confident that if I reintroduce the switch back in place of the > > bridged > > > > > ports on the CCR that all will return to normal. I'll do that > tonight > > > but > > > > > I've noticed the network has less lag which I attribute to "fast > > path" > > > > and > > > > > hate to loose that. > > > > > > > > > > > > > > > On Wed, Nov 6, 2013 at 5:47 PM, Josh Luthman < > > > > [email protected]>wrote: > > > > > > > > > >> If it was acting as a layer 2 switch it wouldn't change anything > > > unless > > > > >> you > > > > >> have something in the firewall. See if use-ip-firewall was > enabled. > > > > >> > > > > >> Is this device doing any routing? Same IPs? Routes? > > > > >> > > > > >> > > > > >> Josh Luthman > > > > >> Office: 937-552-2340 > > > > >> Direct: 937-552-2343 > > > > >> 1100 Wayne St > > > > >> Suite 1337 > > > > >> Troy, OH 45373 > > > > >> > > > > >> > > > > >> On Wed, Nov 6, 2013 at 5:44 PM, RickG <[email protected]> > wrote: > > > > >> > > > > >> > OK, here is a good one that I'm sure is simple but I'm not > getting > > > it! > > > > >> > > > > > >> > I swapped out my RB1100AHx2 for a CCR1016 at my main tower where > > my > > > > >> fiber > > > > >> > feed comes in. Since the CCR doesn't have a built in switch like > > the > > > > >> 1100, > > > > >> > I just bridged the ports between backhauls to the rest of the > > > > network. I > > > > >> > have 3 Tough Switches that sit between the CCR and the AP's. I > can > > > > >> > manage all of my network from my main tower however I cannot > > manage > > > > >> some of > > > > >> > the remotely from home. My home connection is off one of the > > sector > > > > >> AP's on > > > > >> > the main tower. Coincidently, I cannot manage any of the sectors > > but > > > > can > > > > >> > manage the PTP dishes. The sectors happen to be off the same > Tough > > > > >> Switch > > > > >> > and the same port on the CCR. Again, I can manage all other > radios > > > on > > > > >> the > > > > >> > network through the other Tough Switches and other CCR ports. > I'm > > > not > > > > >> doing > > > > >> > anything fancy and the network is totally bridged and using NAT. > > > Each > > > > >> tower > > > > >> > has it's own /24. I had this same setup before only I used an > > > external > > > > >> > switch so I'm sure it has something to do with the bridging. > What > > > am I > > > > >> > missing? > > > > >> > -------------- next part -------------- > > > > >> > An HTML attachment was scrubbed... > > > > >> > URL: < > > > > >> > > > > > >> > > > > > > > > > > http://mail.butchevans.com/pipermail/mikrotik/attachments/20131106/6e889932/attachment.html > > > > >> > > > > > > >> > _______________________________________________ > > > > >> > Mikrotik mailing list > > > > >> > [email protected] > > > > >> > http://mail.butchevans.com/mailman/listinfo/mikrotik > > > > >> > > > > > >> > Visit http://blog.butchevans.com/ for tutorials related to > > Mikrotik > > > > >> > RouterOS > > > > >> > > > > > >> -------------- next part -------------- > > > > >> An HTML attachment was scrubbed... > > > > >> URL: < > > > > >> > > > > > > > > > > http://mail.butchevans.com/pipermail/mikrotik/attachments/20131106/5a439a97/attachment.html > > > > >> > > > > > >> _______________________________________________ > > > > >> Mikrotik mailing list > > > > >> [email protected] > > > > >> http://mail.butchevans.com/mailman/listinfo/mikrotik > > > > >> > > > > >> Visit http://blog.butchevans.com/ for tutorials related to > Mikrotik > > > > >> RouterOS > > > > >> > > > > > > > > > > > > > > > > > > > > -- > > > > > -RickG KyWiFi > > > > > > > > > > > > > > > > > > > > > -- > > > > -RickG KyWiFi > > > > -------------- next part -------------- > > > > An HTML attachment was scrubbed... > > > > URL: < > > > > > > > > > > http://mail.butchevans.com/pipermail/mikrotik/attachments/20131108/32a63b77/attachment.html > > > > > > > > > _______________________________________________ > > > > Mikrotik mailing list > > > > [email protected] > > > > http://mail.butchevans.com/mailman/listinfo/mikrotik > > > > > > > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > > > > RouterOS > > > > > > > -------------- next part -------------- > > > An HTML attachment was scrubbed... > > > URL: < > > > > > > http://mail.butchevans.com/pipermail/mikrotik/attachments/20131108/7058c2ac/attachment.html > > > > > > > _______________________________________________ > > > Mikrotik mailing list > > > [email protected] > > > http://mail.butchevans.com/mailman/listinfo/mikrotik > > > > > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > > > RouterOS > > > > > > > > > > > -- > > -RickG KyWiFi > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: < > > > http://mail.butchevans.com/pipermail/mikrotik/attachments/20131108/f73c6820/attachment.html > > > > > _______________________________________________ > > Mikrotik mailing list > > [email protected] > > http://mail.butchevans.com/mailman/listinfo/mikrotik > > > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > > RouterOS > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://mail.butchevans.com/pipermail/mikrotik/attachments/20131108/53aee5ee/attachment.html > > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.butchevans.com/pipermail/mikrotik/attachments/20131111/a7dcef28/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
