Could be. I just turned up a CCR a couple of weeks ago that is bridging all ports for now. No issues yet.
-Ty On Fri, Nov 8, 2013 at 4:47 PM, RickG <[email protected]> wrote: > Just an update, I moved the AP's off the bridged port on the CCR and all > radios are now remotely accessible. A flaw in the bridging on the CCR? > > > On Wed, Nov 6, 2013 at 6:28 PM, RickG <[email protected]> wrote: > > > I know, it's strange. "use IP-firewall" is checked (enabled). The CCR is > > routing my fiber connection to the Bridged-NAT'd network just like my > > RB1100AHx2 was. All IP's are the same and all routes are the same. I'm > > confident that if I reintroduce the switch back in place of the bridged > > ports on the CCR that all will return to normal. I'll do that tonight but > > I've noticed the network has less lag which I attribute to "fast path" > and > > hate to loose that. > > > > > > On Wed, Nov 6, 2013 at 5:47 PM, Josh Luthman < > [email protected]>wrote: > > > >> If it was acting as a layer 2 switch it wouldn't change anything unless > >> you > >> have something in the firewall. See if use-ip-firewall was enabled. > >> > >> Is this device doing any routing? Same IPs? Routes? > >> > >> > >> Josh Luthman > >> Office: 937-552-2340 > >> Direct: 937-552-2343 > >> 1100 Wayne St > >> Suite 1337 > >> Troy, OH 45373 > >> > >> > >> On Wed, Nov 6, 2013 at 5:44 PM, RickG <[email protected]> wrote: > >> > >> > OK, here is a good one that I'm sure is simple but I'm not getting it! > >> > > >> > I swapped out my RB1100AHx2 for a CCR1016 at my main tower where my > >> fiber > >> > feed comes in. Since the CCR doesn't have a built in switch like the > >> 1100, > >> > I just bridged the ports between backhauls to the rest of the > network. I > >> > have 3 Tough Switches that sit between the CCR and the AP's. I can > >> > manage all of my network from my main tower however I cannot manage > >> some of > >> > the remotely from home. My home connection is off one of the sector > >> AP's on > >> > the main tower. Coincidently, I cannot manage any of the sectors but > can > >> > manage the PTP dishes. The sectors happen to be off the same Tough > >> Switch > >> > and the same port on the CCR. Again, I can manage all other radios on > >> the > >> > network through the other Tough Switches and other CCR ports. I'm not > >> doing > >> > anything fancy and the network is totally bridged and using NAT. Each > >> tower > >> > has it's own /24. I had this same setup before only I used an external > >> > switch so I'm sure it has something to do with the bridging. What am I > >> > missing? > >> > -------------- next part -------------- > >> > An HTML attachment was scrubbed... > >> > URL: < > >> > > >> > http://mail.butchevans.com/pipermail/mikrotik/attachments/20131106/6e889932/attachment.html > >> > > > >> > _______________________________________________ > >> > Mikrotik mailing list > >> > [email protected] > >> > http://mail.butchevans.com/mailman/listinfo/mikrotik > >> > > >> > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > >> > RouterOS > >> > > >> -------------- next part -------------- > >> An HTML attachment was scrubbed... > >> URL: < > >> > http://mail.butchevans.com/pipermail/mikrotik/attachments/20131106/5a439a97/attachment.html > >> > > >> _______________________________________________ > >> Mikrotik mailing list > >> [email protected] > >> http://mail.butchevans.com/mailman/listinfo/mikrotik > >> > >> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > >> RouterOS > >> > > > > > > > > -- > > -RickG KyWiFi > > > > > > -- > -RickG KyWiFi > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://mail.butchevans.com/pipermail/mikrotik/attachments/20131108/32a63b77/attachment.html > > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.butchevans.com/pipermail/mikrotik/attachments/20131108/7058c2ac/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
