I have a couple of business clients on PTMP access points (Omnitiks and
BaseBoxes, with SXT as clients) that are getting perfect download speeds
but their uploads are not good.
Bandwidth tests to the radios from the AP will go as high as 30meg, no
problem. Computer plugged into the ethernet port of the customer radio
testing to the AP only gets 8-12meg on upload. IP connection tracking
is shut off, problem exists in both station-bridge and station mode, no
firewall rules and no queues on the CPE. Queues on the AP were
disabled for testing. CPU load was not a factor. Bandwidth tests
using Windows client from computer plugged into the ethernet port of the
CPE radio will do 100meg. Signal is in the -50 to -60 range. There is
no interference - problem exists on all channels and is clearly within
the radio.
This is on 6.17 firmware. Clients are set to "any" protocol, with AP
set to NV2. Nstreme does not seem to work for some reason.
Any ideas? Why do we get the speeds to the rooftop radio but not to
the device inside? Bizarre!
Matt Larsen
[email protected]
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
