next status... Am 24.08.2010 um 09:49 schrieb Dr. H. Nikolaus Schaller:
> Ok, > now I have collected 4 different 2.4 kernels :) > > Two Skytone Alpha 400 and one Elonex and one that is not working... > > All are slightly different. > > But the minifs is still not running when pressing F3 (I think this is > hard-coded > into the kernel). So I will try as the next step to extract the official > Letux 400 I now managed to get into the minifs using the Alpha400 kernel. But that minifs does not (yet) recognize the Letux 400 .rec format. I may have an undamaged minifs for the L400 somewhere. > kernel from the recovery image. > > Nikolaus > > Am 23.08.2010 um 22:11 schrieb Ruben Viets: > >> From: r_vi...@hotmail.com >> To: mipsbook-devel@linuxtogo.org >> Subject: Re: [Mipsbook-devel] Kernel 2.6 damages Kernel 2.4 in NAND? - was: >> Need to recover, which image to use >> Date: Mon, 23 Aug 2010 19:53:42 +0000 >> >> Hi Nikolaus, >> >> Looks like you didn't damage the u-boot for one of the bricked minibooks. >> Although it looks like there are some issues with ecc/nand. >> >> The dev/mtd1 contain the binary content from the uImage. You can use the >> uImage from the manufacture from the minibook. alpha400, letux400, >> trendtac(site is not working..), onet. >> Check the one from elonex below (you only need the uImage 2MB, it's in the >> 146MB zip file) : >> http://www.elonex.com/support/products/onet/lnxonetrecovery.shtm >> >> I have done some uploads in the past: >> uImage [1MB] [url=http://www.divshare.com/download/6352899-cc9]DivShare File >> - .uImage[/url] >> minifs [2MB] [url=http://www.divshare.com/download/6352758-aac]DivShare File >> - minifs.img[/url] >> recovery elonex for trendtac >> [url=http://www.divshare.com/download/6352739-d3c]DivShare File - >> recovery.img[/url] >> >> Put the items (uImage(without .) , minifs.img, recovery.img) on SD card >> (1st partition vfat): >> boot from SD keep press leftshift, leftfn, leftctrl. Just to try if uImage >> boots. >> leftshift + leftfn + F1 should restore the uImage to /dev/mtd1, this only >> works for kernel 2.4 uimage. >> leftshift + leftfn + rightshift restores the minifs.img to /dev/mtd3 >> Afterwards F3 recovery works for any recovery.img (which is a tar.bz2 from >> any distro) >> >> For kernel 2.6 we need to copy uImage manually with, cat uImage /dev/mtd1, >> but first any nand ecc issues need to be resolved. good luck with JTAG setup. >> >> Some other links here: >> http://trendtac.hyves.nl/forum/3469897/Fg01/Changing_boot_time_splash_screen/ >> http://projects.kwaak.net/twiki/bin/view/Epc700/CompilingAKernel >> http://projects.kwaak.net/twiki/bin/view/Epc700/KernelOfTheWeek >> http://www.liliputing.com/tag/3k-razorbook-400 >> http://www.littlelinuxlaptop.com/ >> http://linuxlaptopforum.ark2webdesign.co.uk/index.php/board,27.0.html >> >> Grt Ruben. > > _______________________________________________ > Mipsbook-devel mailing list > Mipsbook-devel@linuxtogo.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/mipsbook-devel
_______________________________________________ Mipsbook-devel mailing list Mipsbook-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/mipsbook-devel
