Okay... sorry. I was trying to be polite and not bog the server down or
bore others... here is my entire dmesg:
========================================================
OpenBSD 3.6-stable (GENERIC) #0: Mon Apr 11 03:19:36 EST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 299 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 267952128 (261672K)
avail mem = 237613056 (232044K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(7c) BIOS, date 11/17/99, BIOS32 rev. 0 @ 0xfd7a0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 96%
apm0: AC off, battery charge high, estimated 11:55 hours
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Neomagic Magicgraph NM2200" rev 0x20
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK3021GAS>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRN-8241B, 1.16> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 2 function 3 not configured
cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1251 CardBus" rev
0x01: irq 11
cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1251 CardBus" rev
0x01: irq 11
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 6 function 0 not configured
eso0 at pci0 dev 7 function 0 "ESS SOLO-1 AudioDrive" rev 0x02: ES1946
rev E, irq 5
eso0: mapping Audio 1 DMA using VC I/O space at 0xfc70
audio0 at eso0
opl0 at eso0: model OPL3
midi0 at opl0: <ESO Yamaha OPL3>
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x80
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x80
pcmcia1 at cardslot1
biomask efdd netmask efdd ttymask ffdf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ep1 at pcmcia0 function 0 "3Com, OfficeConnect 572B, B" port 0xa000/32:
address 00:00:86:62:83:f5
tqphy0 at ep1 phy 0: 78Q2120 10/100 media interface, rev. 10
wi0 at pcmcia1 function 0 "U.S. Robotics, IEEE 802.11b PC-CARD, Version
01.02" port 0xa400/64
wi0: PRISM2 HWB3163 rev.A, Firmware 0.3.0 (primary), 1.7.1 (station),
address 00:90:d1:08:44:7d
=======================================================================
The mixer settings were given in their entirety (even though I used
<snip>), but here they are again:
========================================================================
# mixerctl -av
inputs.dac=112,112 volume
inputs.mic=0,0 volume
inputs.line=0,0 volume
inputs.fmsynth=112,112 volume
inputs.mono_in=0 volume
inputs.cd=0,0 volume
inputs.auxb=0,0 volume
outputs.master=252,252 volume
outputs.pc_speaker=112 volume
outputs.spatial=0 level
outputs.spatial.enable=off [ off on ]
record.record=32,32 volume
record.dac=240,240 volume
record.mic=0,0 volume
record.line=0,0 volume
record.fmsynth=240,240 volume
record.mono_in=0 volume
record.cd=0,0 volume
record.auxb=0,0 volume
record.source=mic [ mic line cd mixerout ]
outputs.mono_out=mute [ mute dac mixerout ]
monitor.mute=off [ off on ]
mic.preamp=off [ off on ]
==========================================================================
Any help is very appreciated. Thank you.
Chris
