Hi all.
I have installed OpenBSD 3.7 on SparcStation 4. The installation process
finished successfully.
But I have a issue with keyboard. My keyboard is type5 spanish. In the
login field, X or console, I can write the "Q" letter. After I login
with normal user this key don4t work, only beep. When I4m root this key
work as spected, but arrows keys don4t work
From normal user I tried wsconsctl to turn to spanish encoding and I
have no errors, but this key "Q", only beep. I do the same with kbd but
I have no differences.
In a X, I tried XKeycaps, and the keyboard detected is a PC with 104
keys. When I change this by keyboard Sun Microsystems Type 5
OpenWindows Spanish layout and write changes, there are no working keys.
All the keys are mapping different that I can see in Xkeycaps. For
example, if I press "H" the key obtained by xkeycaps is "7".
Where is the problem?
This is my first post and I hope to help you in a few time. Thank you
very much.
Carlos.
This is my dmesg result:
OpenBSD 3.7 (GENERIC) #312: Mon Mar 21 00:14:33 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc/compile/GENERIC
real mem = 33214464
avail mem = 25190400
using 200 buffers containing 1658880 bytes of memory
bootpath:
/[EMAIL PROTECTED],10000000/[EMAIL PROTECTED],10001000/[EMAIL PROTECTED],8400000/[EMAIL PROTECTED],8800000/[EMAIL PROTECTED],0
mainbus0 (root): SUNW,SPARCstation-4
cpu0 at mainbus0: MB86904 @ 110 MHz, on-chip FPU
cpu0: 16K instruction (32 b/l), 8K data (16 b/l) cache enabled
obio0 at mainbus0
clock0 at obio0 addr 0x71200000: mk48t08 (eeprom)
timer0 at obio0 addr 0x71d00000 delay constant 52
zs0 at obio0 addr 0x71100000 pri 12, softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at obio0 addr 0x71000000 pri 12, softpri 6
zskbd0 at zs1 channel 0: keyboard, type 5, layout 0x2a
wskbd0 at zskbd0: console keyboard
zstty2 at zs1 channel 1: mouse
slavioconfig at obio0 addr 0x71800000 not configured
auxreg0 at obio0 addr 0x71900000
power0 at obio0 addr 0x71910000
fdc0 at obio0 addr 0x71400000 pri 11, softpri 4: chip 82077
iommu0 at mainbus0 addr 0x10000000: version 0x4/0x0, page-size 4096,
range 64MB
sbus0 at iommu0: clock = 22 MHz
dma0 at sbus0 slot 4 offset 0x8400000: rev 2
esp0 at dma0 offset 0x8800000 pri 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 3 lun 0: <FUJITSU, MAN3184MC, 5508> SCSI3 0/direct
fixed
sd0: 17366MB, 29694 cyl, 2 head, 598 sec, 512 bytes/sec, 35566478 sec total
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, XM-4101TASUNSLCD, 1755> SCSI2
5/cdrom removable
bpp0 at sbus0 slot 4 offset 0xc800000: DMA2
ledma0 at sbus0 slot 4 offset 0x8400010: rev 2
le0 at ledma0 offset 0x8c00000 pri 6: address 08:00:20:7b:13:e6
le0: 16 receive buffers, 4 transmit buffers
tcx0 at sbus0 slot 2 offset 0x800000: 1152x900, id 0, rev 2, sense 0
wsdisplay0 at tcx0: console (std, sun emulation), using wskbd0
power-management at sbus0 slot 3 offset 0xa000000 not configured
root on sd0a
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102
