Am 07.11.2011 15:34, schrieb Norman Golisz: > I don't know either. But, you could try to disable the vmt(4) driver at > boot. At the boot prompt, type "boot -c" to trigger the UKC. At the UKC > prompt, > type "disable vmt". Then type "quit". If your system boots up without errors, > you can preserve this setting by using config(8):
Thanks. Unfortunately I get a "protection fault trap" now. Anything else to disable? Walter boot -c booting hd0a:/bsd: 8192892+1088776 [61+367888+353319]=0x98a398 entry point at 0x200120 [ using 721684 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Phenom(tm) II X6 1100T Processor ("AuthenticAMD" 686-class, 512KB L2 cache) 3.31 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,POPCNT real mem = 402178048 (383MB) avail mem = 385548288 (367MB) User Kernel Config UKC> disable vmt disable vmt 488 vmt0 disabled UKC> quit quit Continuing... mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/23/99, BIOS32 rev. 0 @ 0xff046, SMBIOS rev. 2.4 @ 0x17fffef0 (10 entries) bios0: vendor Bochs version "Bochs" date 01/01/2007 bios0: Bochs Bochs acpi0 at bios0: rev 0 acpi0: sleep states S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC HPET acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat acpihpet0 at acpi0: 100000000 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0 mpbios0 at bios0: Intel MP Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 1000MHz mpbios0: bus 0 is type PCI mpbios0: bus 1 is type ISA ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 bios0: ROM list: 0xc0000/0x9e00 0xca000/0xa00 0xcb000/0xa00 0xcc000/0x600 0xcc800/0x2400 vmt at mainbus0 not configured kernel: protection fault trap, code=0 Stopped at k1x_init+0x56: rdmsr k1x_init(d0ad7540,d0b8ce58,d059ce20,0,30000002) at k1x_init+0x56 mainbus_attach(0,d130bfc0,0,d09aafc0,0) at mainbus_attach+0xc1 config_attach(0,d09aafc0,0,0,d0a1bc40) at config_attach+0x1bb config_rootfound(d08cde8c,0,0,d03d8b51,0) at config_rootfound+0x46 cpu_configure(d0ad7540,1,1000,cff3f000,1) at cpu_configure+0x29 main(d02004ba,d02004c2,0,0,0) at main+0x3ea ddb>