Hi, i'm not english but i hope you'll understand the problem is: ERR M when booting, but let's start from beginning
I have a pii 350MHz, 4Gb hard disk and i want to install openbsd 3.8, so i created a boot cd, followed the instruction and everthing was fine with this settings: entire disk for openbsd wd0a 100M / wd0b 150M swap wd0d 200M /tmp wd0e 300M /var wd0f 2G /usr wd0g remaining /home installation from ftp with bsd bsd.rd base38.tgz etc38.tgz comp38.tgz man38.tgz misc38.tgz i selected no x server Once finished the installation "he" suggested me to type halt and reboot from hd: Using drive 0, partition3; Loading... ERR M i read a topic like this so i tried: # mount /dev/wd0a /mnt # mount /dev/wd0f /mnt/usr (this isn't really necessary because when i mount wd0a i see /usr mounted too, maybe just because they are on the same partition with different labels) # rm -rf /mnt/boot # cp /mnt/usr/mdec/boot /mnt/boot # /mnt/usr/mdec/installboot -v /mnt/boot /mnt/usr/mdec/biosboot wd0 the output was: boot: /mnt/boot proto: /usr/mdec/biosboot device: /dev/rwd0c /usr/mdec/biosboot: entry point 0 proto bootblock size 512 /mnt/boot is 3 blocks x 12384 bytes fs block shift 2; part offset 63; inode block 24; offset 1576 using MBR partition 3: type 166 (0xa6) offset 63 (0x3f) booting and holding shift: !Using drive 0, partition 3; !Loading;... ERR M if i type boot> boot hd0a:/bsd booting hd0a:/bsd: \ and nothing appens boot> machine diskinfo Disk BIOS# Type Cyls Heads Secs Flags Checksum fd0 0x0 *none* 80 2 18 0x4 0x0 hd0 0x00 label 524 255 63 0x2 0xcada9542 cd0 0x9f label 0 0 0 0xa 0x0 don't know what to do [demime 1.01d removed an attachment of type application/pgp-signature]
