What a "usbdevs -dv" gives to you? -David
On 11/24/05, Stephan A. Rickauer <[EMAIL PROTECTED]> wrote: > Hello, > > Stephan A. Rickauer wrote: > >> ugen0 at uhub4 port 1 > >> ugen0: ASIX Electronics AX88178, rev 2.00/0.01, addr 2 > >> > >> I guess I _was_ unlucky. It's a Level one usb-0200. > > > > Seems I was to quick. axe(4) should be the right one ... I'll try. > > I am stuck now. All I could find out was that I have this device > connected at hub4, which theoretically is supported by the axe driver: > > Controller /dev/usb4: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub4 > port 1 addr 2: high speed, power 450 mA, config 1, AX88178(0x1780), > ASIX Electronics(0x0b95), rev 0.01 > ugen0 > > But I have no clue whether the desirable axe0 should have been created > automatically or whether I have to do that. I've read the usb, axe and > ugen man pages and searched the openbsd website but it's unclear to me > what I am supposed to do now. At the end I'd like to be able to > configure the device using ifconfig. > > Please help me. Thanks. > > > -- > > Stephan A. Rickauer > > ---------------------------- > Institut f|r Neuroinformatik > Universitdt / ETH Z|rich > Winterthurerstriasse 190 > CH-8057 Z|rich > > Tel: +41 44 635 30 50 > Sek: +41 44 635 30 52 > Fax: +41 44 635 30 53 > > http://www.ini.ethz.ch > ----------------------------
