On Mon, Feb 19, 2018 at 11:12:52AM -0800, Mike Larkin wrote: > On Mon, Feb 19, 2018 at 02:40:47PM +0100, Robert Paschedag wrote: > > Hi misc, > > > > I am running STABLE and just started testing running debian within vmd and > > this works quite well right now. > > > > Now I noticed, that vmctl status shows the vm as STOPPED, although it is > > running. > > > > I can connect to the console without problems. Is this status showing some > > "other" status? > > > > Thanks. > > Robert > > > > An OS can spent a large amount of time "doing nothing" - eg, in it's idle > loop. >
What horrible English. This was written before coffee. "spend" and "its" are, of course, what I meant to type there. > What you are seeing is that your guest OS has executed a HLT instruction > (likely > in that idle loop) and thus, vmd is not running at that precise instant in > time > when you ran the command, because there is nothing to do. > > I bet if you ran something that consumed guest CPU, and ran the same command, > you'd see something else. > > -ml > > > pasche@tux2:~$ vmctl status > > ID PID VCPUS MAXMEM CURMEM TTY OWNER NAME > > 1 10854 1 2.0G 217M ttyp2 pasche debian > > pasche@tux2:~$ vmctl status 1 > > ID PID VCPUS MAXMEM CURMEM TTY OWNER NAME > > 1 10854 1 2.0G 217M ttyp2 pasche debian > > VCPU: 0 STATE: STOPPED > > pasche@tux2:~$ ps aux | grep vmd > > _vmd 41407 0.0 0.0 1188 1756 ?? Ssp 2:16PM 0:00.01 vmd: vmm > > (vmd) > > root 79080 0.0 0.0 1112 1640 ?? Is 2:16PM 0:00.01 vmd: priv > > (vmd) > > _vmd 51293 0.0 0.0 1184 1732 ?? Ssp 2:16PM 0:00.01 vmd: > > control (vmd) > > root 82177 0.0 0.0 1364 1672 ?? Ssp 2:16PM 0:00.01 > > /usr/sbin/vmd > > _vmd 10854 0.0 0.4 2099748 64808 ?? Ip 2:16PM 0:20.73 vmd: > > debian (vmd) > > pasche 24262 0.0 0.0 132 328 p1 R+/1 2:39PM 0:00.00 grep vmd > > pasche@tux2:~$ vmctl console 1 > > Connected to /dev/ttyp2 (speed 115200) > > > > Debian GNU/Linux 9 debian-vm ttyS0 > > > > debian-vm login: > > [EOT] > > pasche@tux2:~$ > > > > > > OpenBSD 6.2 (GENERIC.MP) #5: Fri Feb 2 23:02:19 CET 2018 > > > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 16708087808 (15934MB) > > avail mem = 16194699264 (15444MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries) > > bios0: vendor LENOVO version "HEET34WW (1.15 )" date 07/02/2013 > > bios0: LENOVO 68852HG > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SSDT SSDT ASF! HPET APIC MCFG FPDT SSDT SSDT UEFI > > UEFI POAT UEFI DBG2 > > acpi0: wakeup devices P0P1(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S3) PXSX(S4) > > RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) > > RP05(S4) PXSX(S4) [...] > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.51 MHz > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: TSC frequency 2594510480 Hz > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 1, core 0, package 0 > > cpu2 at mainbus0: apid 2 (application processor) > > cpu2: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 0, core 1, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (P0P1) > > acpiprt2 at acpi0: bus 3 (RP01) > > acpiprt3 at acpi0: bus 4 (RP02) > > acpiprt4 at acpi0: bus -1 (RP03) > > acpiprt5 at acpi0: bus 5 (RP04) > > acpiprt6 at acpi0: bus -1 (RP05) > > acpiprt7 at acpi0: bus -1 (RP06) > > acpiprt8 at acpi0: bus -1 (RP07) > > acpiprt9 at acpi0: bus -1 (RP08) > > acpiprt10 at acpi0: bus -1 (PEG0) > > acpiprt11 at acpi0: bus -1 (PEG1) > > acpiprt12 at acpi0: bus -1 (PEG2) > > acpiprt13 at acpi0: bus -1 (PEG3) > > acpiec0 at acpi0 > > acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), > > C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), > > C1(1000@1 mwait.1), PSS > > acpicpu2 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), > > C1(1000@1 mwait.1), PSS > > acpicpu3 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), > > C1(1000@1 mwait.1), PSS > > acpitz0 at acpi0: critical temperature is 100 degC > > "INT3F0D" at acpi0 not configured > > acpithinkpad0 at acpi0 > > "PNP0C14" at acpi0 not configured > > acpibat0 at acpi0: BAT0 model "45N1045" serial 99 type LION oem "SMP" > > acpiac0 at acpi0: AC unit offline > > "PTL0001" at acpi0 not configured > > "LEN2002" at acpi0 not configured > > acpibtn0 at acpi0: PWRB > > acpibtn1 at acpi0: LID0 > > "INT340E" at acpi0 not configured > > acpivideo0 at acpi0: VID_ > > acpivout at acpivideo0 not configured > > cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300, > > 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > > drm0 at inteldrm0 > > inteldrm0: msi > > inteldrm0: 1366x768, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 > > usb1 at ehci0: USB revision 2.0 > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > > azalia0: codecs: Conexant CX20590, Intel/0x2806, using Conexant CX20590 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > > pci1 at ppb0 bus 3 > > rtsx0 at pci1 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi > > sdmmc0 at rtsx0: 4-bit > > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > > pci2 at ppb1 bus 4 > > iwn0 at pci2 dev 0 function 0 "Intel Centrino Wireless-N 2230" rev 0xc4: > > msi, MIMO 2T2R, BGN, address 68:17:29:ec:ca:7f > > ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi > > pci3 at ppb2 bus 5 > > re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL > > (0x2c80), msi, address 28:d2:44:26:fa:e9 > > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 > > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 > > usb2 at ehci1: USB revision 2.0 > > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04 > > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > > 1.3 > > ahci0: port 0: 6.0Gb/s > > ahci0: port 2: 1.5Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT525MX3, M0C> SCSI3 0/direct > > fixed naa.500a075116e63f65 > > sd0: 500786MB, 512 bytes/sector, 1025610768 sectors, thin > > cd0 at scsibus1 targ 2 lun 0: <HL-DT-ST, DVDRAM GU70N, LE20> ATAPI 5/cdrom > > removable > > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 > > int 18 > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > vmm0 at mainbus0: VMX/EPT > > error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo > > underrun on pch transcoder A > > error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder > > A FIFO underrun > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > ugen0 at uhub3 port 3 "Intel product 0x07da" rev 2.00/78.69 addr 3 > > ugen1 at uhub3 port 4 "Validity Sensors VFS5011 Fingerprint Reader" rev > > 1.10/0.78 addr 4 > > uvideo0 at uhub3 port 6 configuration 1 interface 0 "Vimicro corp. > > Integrated Camera" rev 2.00/39.89 addr 5 > > video0 at uvideo0 > > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd0a (142ebbf3d95f9810.a) swap on sd0b dump on sd0b > > >
