ok, I think I figured out what the problem is...OpenBSD recognizes my ZTE MF195 but doesn't see it as a ucom device but as a storage (sd and cd(!))
here's my usbdevs: Controller /dev/usb0: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub0 port 1 powered port 2 powered port 3 addr 2: high speed, power 500 mA, config 1, MF195(0x1514), ZTE(0x19d2), rev 0.01, iSerialNumber MF1950TMOD000000 umass0 port 4 powered port 5 powered port 6 powered Controller /dev/usb1: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub1 port 1 powered port 2 powered port 3 powered port 4 addr 2: high speed, power 500 mA, config 1, Silicon Media R/W(0x01bd), Sony(0x054c), rev 3.95, iSerialNumber 500000020C59 umass1 port 5 powered port 6 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub2 port 1 addr 2: low speed, power 100 mA, config 1, Dell QuietKey Keyboard(0x2106), DELL(0x413c), rev 1.01 uhidev0 port 2 addr 3: low speed, power 98 mA, config 1, Usb Mouse(0x0034), SIGMACHIP(0x1c4f), rev 1.10 uhidev1 Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub3 port 1 powered port 2 powered Controller /dev/usb4: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub4 port 1 powered port 2 powered Controller /dev/usb5: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub5 port 1 powered port 2 powered Controller /dev/usb6: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub6 port 1 powered port 2 powered Controller /dev/usb7: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub7 port 1 powered port 2 powered and here's my dmesg: OpenBSD 6.3 (GENERIC.MP <http://generic.mp/>) #107: Sat Mar 24 14:21:59 MDT 2018 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP <http://generic.mp/> real mem = 4277010432 (4078MB) avail mem = 4140306432 (3948MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (39 entries) bios0: vendor Award Software International, Inc. version "F1" date 06/22/2007 bios0: Gigabyte Technology Co., Ltd. P35C-S3 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET MCFG APIC SSDT SSDT acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5) HUB0(S5) UAR1(S3) IGBE(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) US31(S3) USB4(S3) USB5(S3) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz, 2667.05 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16, xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN cpu0: 4MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 333MHz cpu0: mwait min=64, max=64, C-substates=0.2.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz, 2666.66 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16, xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN cpu1: 4MB 64b/line 16-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins , remapped to apid 2 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (PEX0) acpiprt2 at acpi0: bus -1 (PEX1) acpiprt3 at acpi0: bus -1 (PEX2) acpiprt4 at acpi0: bus 3 (PEX3) acpiprt5 at acpi0: bus 4 (PEX4) acpiprt6 at acpi0: bus -1 (PEX5) acpiprt7 at acpi0: bus 5 (HUB0) acpicpu0 at acpi0: C1(@1 halt!), FVS, 2667, 2000 MHz acpicpu1 at acpi0: C1(@1 halt!), FVS, 2667, 2000 MHz acpibtn0 at acpi0: PWRB pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi azalia0: codecs: Realtek ALC885 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi pci3 at ppb2 bus 3 jmb0 at pci3 dev 0 function 0 "JMicron JMB368 IDE" rev 0x00 pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 2 int 19 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H50L, 1.00> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 pciide0: channel 1 disabled (no drives) ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: msi pci4 at ppb3 bus 4 re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), msi, address 00:1a:4d:4d:bb:18 rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci5 at ppb4 bus 5 pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02 pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 19 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <ST3160815AS> wd0: 16-sector PIO, LBA48, 152626MB, 312579695 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic 2 int 19 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it0 at isa0 port 0x2e/2: IT8718F rev 4, EC port 0x290 vmm0 at mainbus0: VMX umass0 at uhub0 port 3 configuration 1 interface 0 "ZTE MF195" rev 2.00/0.01 addr 2 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 cd1 at scsibus2 targ 1 lun 0: <ZTE, USB SCSI CD-ROM, 0001> SCSI0 5/cdrom removable sd0 at scsibus2 targ 1 lun 1: <ZTE, Storage, 0001> SCSI0 0/direct removable umass1 at uhub1 port 4 configuration 1 interface 0 "Sony Silicon Media R/W" rev 2.00/3.95 addr 2 umass1: using SCSI over Bulk-Only scsibus3 at umass1: 2 targets, initiator 0 sd1 at scsibus3 targ 1 lun 0: <Sony, USB HS-CF Card, 3.95> SCSI0 0/direct removable sd2 at scsibus3 targ 1 lun 1: <Sony, USB HS-SM Card, 3.95> SCSI0 0/direct removable sd3 at scsibus3 targ 1 lun 2: <Sony, USB HS-MS Card, 3.95> SCSI0 0/direct removable sd4 at scsibus3 targ 1 lun 3: <Sony, USB HS-SD Card, 3.95> SCSI0 0/direct removable uhidev0 at uhub2 port 1 configuration 1 interface 0 "DELL Dell QuietKey Keyboard" rev 1.10/1.01 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub2 port 2 configuration 1 interface 0 "SIGMACHIP Usb Mouse" rev 1.10/1.10 addr 3 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets root on wd0a (b62b4179bd7ce1bb.a) swap on wd0b dump on wd0b soooo....I am screwed, right? 2018-04-19 23:06 GMT+02:00 MS <beirootpu...@gmail.com>: > ok, I think I figured out what the problem is...OpenBSD recognizes my ZTE > MF195 but doesn't see it as a ucom device but as a storage (sd and cd(!)) > > here's my usbdevs: > > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub0 > port 1 powered > port 2 powered > port 3 addr 2: high speed, power 500 mA, config 1, MF195(0x1514), > ZTE(0x19d2), rev 0.01, iSerialNumber MF1950TMOD000000 > umass0 > port 4 powered > port 5 powered > port 6 powered > Controller /dev/usb1: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub1 > port 1 powered > port 2 powered > port 3 powered > port 4 addr 2: high speed, power 500 mA, config 1, Silicon Media > R/W(0x01bd), Sony(0x054c), rev 3.95, iSerialNumber 500000020C59 > umass1 > port 5 powered > port 6 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub2 > port 1 addr 2: low speed, power 100 mA, config 1, Dell QuietKey > Keyboard(0x2106), DELL(0x413c), rev 1.01 > uhidev0 > port 2 addr 3: low speed, power 98 mA, config 1, Usb Mouse(0x0034), > SIGMACHIP(0x1c4f), rev 1.10 > uhidev1 > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub3 > port 1 powered > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub4 > port 1 powered > port 2 powered > Controller /dev/usb5: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub5 > port 1 powered > port 2 powered > Controller /dev/usb6: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub6 > port 1 powered > port 2 powered > Controller /dev/usb7: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub7 > port 1 powered > port 2 powered > > > and here's my dmesg: > OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4277010432 (4078MB) > avail mem = 4140306432 (3948MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (39 entries) > bios0: vendor Award Software International, Inc. version "F1" date > 06/22/2007 > bios0: Gigabyte Technology Co., Ltd. P35C-S3 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET MCFG APIC SSDT SSDT > acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) > PEX5(S5) HUB0(S5) UAR1(S3) IGBE(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) > US31(S3) USB4(S3) USB5(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz, 2667.05 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > cpu0: 4MB 64b/line 16-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 333MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz, 2666.66 MHz > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > cpu1: 4MB 64b/line 16-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > , remapped to apid 2 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (PEX0) > acpiprt2 at acpi0: bus -1 (PEX1) > acpiprt3 at acpi0: bus -1 (PEX2) > acpiprt4 at acpi0: bus 3 (PEX3) > acpiprt5 at acpi0: bus 4 (PEX4) > acpiprt6 at acpi0: bus -1 (PEX5) > acpiprt7 at acpi0: bus 5 (HUB0) > acpicpu0 at acpi0: C1(@1 halt!), FVS, 2667, 2000 MHz > acpicpu1 at acpi0: C1(@1 halt!), FVS, 2667, 2000 MHz > acpibtn0 at acpi0: PWRB > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 16 > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 21 > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 18 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi > azalia0: codecs: Realtek ALC885 > audio0 at azalia0 > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi > pci3 at ppb2 bus 3 > jmb0 at pci3 dev 0 function 0 "JMicron JMB368 IDE" rev 0x00 > pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to > native-PCI > pciide0: using apic 2 int 19 for native-PCI interrupt > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H50L, 1.00> ATAPI > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 > pciide0: channel 1 disabled (no drives) > ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: msi > pci4 at ppb3 bus 4 > re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), > msi, address 00:1a:4d:4d:bb:18 > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 19 > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 > pci5 at ppb4 bus 5 > pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02 > pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 2 int 19 for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <ST3160815AS> > wd0: 16-sector PIO, LBA48, 152626MB, 312579695 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 > int 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 > spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 > pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide2: using apic 2 int 19 for native-PCI interrupt > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x2e/2: IT8718F rev 4, EC port 0x290 > vmm0 at mainbus0: VMX > umass0 at uhub0 port 3 configuration 1 interface 0 "ZTE MF195" rev > 2.00/0.01 addr 2 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > cd1 at scsibus2 targ 1 lun 0: <ZTE, USB SCSI CD-ROM, 0001> SCSI0 5/cdrom > removable > sd0 at scsibus2 targ 1 lun 1: <ZTE, Storage, 0001> SCSI0 0/direct removable > umass1 at uhub1 port 4 configuration 1 interface 0 "Sony Silicon Media > R/W" rev 2.00/3.95 addr 2 > umass1: using SCSI over Bulk-Only > scsibus3 at umass1: 2 targets, initiator 0 > sd1 at scsibus3 targ 1 lun 0: <Sony, USB HS-CF Card, 3.95> SCSI0 0/direct > removable > sd2 at scsibus3 targ 1 lun 1: <Sony, USB HS-SM Card, 3.95> SCSI0 0/direct > removable > sd3 at scsibus3 targ 1 lun 2: <Sony, USB HS-MS Card, 3.95> SCSI0 0/direct > removable > sd4 at scsibus3 targ 1 lun 3: <Sony, USB HS-SD Card, 3.95> SCSI0 0/direct > removable > uhidev0 at uhub2 port 1 configuration 1 interface 0 "DELL Dell QuietKey > Keyboard" rev 1.10/1.01 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub2 port 2 configuration 1 interface 0 "SIGMACHIP Usb Mouse" > rev 1.10/1.10 addr 3 > uhidev1: iclass 3/1 > ums0 at uhidev1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on wd0a (b62b4179bd7ce1bb.a) swap on wd0b dump on wd0b > > soooo....I am screwed, right? > > > 2018-04-17 9:29 GMT+02:00 Stuart Henderson <s...@spacehopper.org>: > >> On 2018-04-16, MS <beirootpu...@gmail.com> wrote: >> > One more thing though, how do I know which USB port is which cuaXX? If I >> > connect to cua00 it seems to start conversation but the whole thing >> > freezes. cuaU0 gives not configured info. >> >> It would be a cuaU* device, the exact number depends on whether you have >> other USB UARTs and on how the device itself works (there are often >> additional "control-only" devices). >> >> "not configured" suggests there might be a problem though. Showing a >> dmesg and usbdevs -dv with the device plugged in would be a good start. >> (complete dmesg, don't trim it). >> >> >> >