On 2021-05-08, Bastien Durel <bast...@durel.org> wrote:
> Le 07/05/2021 à 22:50, Stuart Henderson a écrit :
>> On 2021-05-07, Bastien Durel <bast...@durel.org> wrote:
>>> Hello,
>>>
>>> I have multiple ISPs plugged on my OpenBSD box, each one providing its
>>> IPv6 address space.
>>>
>>> I used to route outgoing streams with :
>>>
>>> net2_if = pppoe0
>>> ovh_v6_router = "(" $net2_if fe80::230:88ff:fe04:63c9 ")"
>>> ovh_v6_prefix = "2001:41d0:fe4b:ec00::0/56"
>>> table <internal6> const { $ovh_v6_prefix, $free_v6_prefix, $ripe_v6_prefix }
>>> pass out on $net_if from $ovh_v6_prefix to !<internal6> route-to
>>> $ovh_v6_router
>>> pass out on $tun_ifs from $ovh_v6_prefix to !<internal6> route-to
>>> $ovh_v6_router
>>
>> This is no longer valid syntax for route-to. Check the 6.9 upgrade notes.
>>
>>
> I read the upgrade note, but there is nothing about IPv6 LL addresses
>
> As said in my previous e-mail :
> > I replaced ovh_v6_router by fe80::230:88ff:fe04:63c9%pppoe0
Does it work if you use the syntax suggested in the upgrade notes
for the example with "pass in on pppoe1 reply-to ..."?
