-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Marc,
Marc Peters wrote: > hello misc, > > i bought a soekris 4801 from wim and wanted to install it via net. when > i boot the box it gets it ip-address and when it comes to load bsd.rd it > loads the kernel but hangs during load: > >>> OpenBSD/i386 PXEBOOT 1.07 > switching console to com0 >>> OpenBSD/i386 PXEBOOT 1.07 > booting tftp:bsd.rd: 4435508+740284 [52+155376+141982]=0x538528 > entry point at 0x100120 > ~$f$~xxf$~$f$8~8~$f$f$ > Just a wild guess, but to me this looks like the serial console tries to go out with 9600 baud, which is wrong. You get garbled output or no output. The soekris boards want to run 19200 baud IIRC. > > ~ # cat /tftpboot/etc/boot.conf > set tty com0 > boot bsd.rd you may want to define the speed of your console here :) stty com0 19200 :) good luck, Marian iD8DBQFEfDjJgAq87Uq5FMsRAl+hAKDPFF8hES45qSyCu2s4LpHph20+qACfR0JJ nKaTEuLno/rFRZuZwcaZjnk= =nm+y -----END PGP SIGNATURE-----
