hi marian,
Marian Hettwer schrieb:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi Marc,
Marc Peters wrote:
hello misc,
i bought a soekris 4801 from wim and wanted to install it via net. when
i boot the box it gets it ip-address and when it comes to load bsd.rd it
loads the kernel but hangs during load:
OpenBSD/i386 PXEBOOT 1.07
switching console to com0
OpenBSD/i386 PXEBOOT 1.07
booting tftp:bsd.rd: 4435508+740284 [52+155376+141982]=0x538528
entry point at 0x100120
~$f$~xxf$~$f$8~8~$f$f$
Just a wild guess, but to me this looks like the serial console tries to
go out with 9600 baud, which is wrong. You get garbled output or no output.
The soekris boards want to run 19200 baud IIRC.
~ # cat /tftpboot/etc/boot.conf
set tty com0
boot bsd.rd
you may want to define the speed of your console here :)
stty com0 19200
changed the settings in the boot.conf but this doesn't work, too :(. now
the terminal hangs right after the entry point and no more output:
probing: pc0 com0 com1 pci pxe![2.1] mem[639K 127M a20=on]
disk: hd0+*
net: mac 00:00:24:c6:5c:f8, ip 192.168.83.3, server 192.168.83.208
>> OpenBSD/i386 PXEBOOT 1.07
com0: 19200 baud
booting tftp:bsd.rd: 4435220+740284 [52+155408+142012]=0x538444
entry point at 0x100120
marc
