Hello list!
After doing a fresh install of todays snapshot on my HP Pavilion
ZV5000 laptop, the system doesn't boot anymore.
When it gets on the line below, the CPU goes full speed (the fan goes
full power) and the system seems to hang:
"Texas Instruments PCI1620 Misc" rev 0x01 at pci2 dev 4 function 2 not
configured
ohci2 at pci2 dev 7 function 0 "NEC USB" rev 0x43: irq 10, version
1.0, legacy support
The line above is from an old succesfull dmesg that I took with
3.9-current. This old dmesg is at the end of the email. I think
there's no way to post a dmesg of the failing boot because this latpop
does not have a COM port =( If need be, I'll just write down the boot
process and type it on another email.
So, any ideas? It seems the problem is somehow USB related. Is there
any serious modification to the USB code that may have caused this?
Now, as a side note, while using 4.1-release I couldn't get the audio
driver (auixp) to work properly using headphones. With headphones
plugged in, I get no sound on them, and the laptop speakers won't mute
automagically. It would be really nice to have this little quirk
working =)
Well, thanks everyone!
OpenBSD 3.9-current (GENERIC) #693: Sat Apr 15 16:17:16 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID
real mem = 401633280 (392220K)
avail mem = 359100416 (350684K)
using 4278 buffers containing 20185088 bytes (19712K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e9) BIOS, date 12/15/04, BIOS32 rev. 0 @ 0xfd710
pcibios0 at bios0: rev 2.1 @ 0xfd710/0x8f0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/208 (11 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1002 product 0x434c
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xd0000/0x6000! 0xd6000/0x1000 0xd7000/0x800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI Radeon IGP 9100 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "ATI Radeon IGP 9100 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon Mobility IGP 9100" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 19 function 0 "ATI SB200 USB" rev 0x01: irq 11,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 19 function 1 "ATI SB200 USB" rev 0x01: irq 11,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
piixpm0 at pci0 dev 20 function 0 "ATI SB200 SMBus" rev 0x16: SMI
iic0 at piixpm0
pciide0 at pci0 dev 20 function 1 "ATI IXP200 IDE" rev 0x00: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM120JC>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DV-W28EW, C.0S> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
pcib0 at pci0 dev 20 function 3 "ATI SB200 PCI-ISA" rev 0x00
ppb1 at pci0 dev 20 function 4 "ATI SB200 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
"Texas Instruments TSB43AB21 FireWire" rev 0x00 at pci2 dev 0 function
0 not configured
"Broadcom BCM4306" rev 0x03 at pci2 dev 2 function 0 not configured
rl0 at pci2 dev 3 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:0f:b0:4a:bc:aa
rlphy0 at rl0 phy 0: RTL internal PHY
cbb0 at pci2 dev 4 function 0 "Texas Instruments PCI1620 CardBus" rev
0x01: irq 10
cbb1 at pci2 dev 4 function 1 "Texas Instruments PCI1620 CardBus" rev
0x01: irq 10
"Texas Instruments PCI1620 Misc" rev 0x01 at pci2 dev 4 function 2 not
configured
ohci2 at pci2 dev 7 function 0 "NEC USB" rev 0x43: irq 10, version
1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ohci3 at pci2 dev 7 function 1 "NEC USB" rev 0x43: irq 5, version 1.0,
legacy support
usb3 at ohci3: USB revision 1.0
uhub3 at usb3
uhub3: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci2 dev 7 function 2 "NEC USB" rev 0x04: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: NEC EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 5 ports with 5 removable, self powered
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x40
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x40
pcmcia1 at cardslot1
auixp0 at pci0 dev 20 function 5 "ATI IXP200 AC97" rev 0x00: irq 10
auixp0: soft resetting aclink
"ATI IXP200 Modem" rev 0x01 at pci0 dev 20 function 6 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
viasio0 at isa0 port 0x4e/2: VT1211 rev 0x02: HM: not activated WDG:
not activated
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef7d netmask ef7d ttymask ffff
pctr: user-level cycle counter enabled
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: vendor 0x062a product 0x0000, rev 1.10/0.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auixp0
--
An OpenBSD user... and that's all you need to know =)
Please, send private emails to [EMAIL PROTECTED]
