Thanks John!
I had to disable ohci and ehci to succesfully boot the machine.
Here's the dmesg:
OpenBSD 4.1-current (GENERIC) #254: Thu Jun 7 00:24:55 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 1206939648 (1151MB)
avail mem = 1153245184 (1099MB)
User Kernel Config
UKC> disable ehc\^H \^H\^H \^H\^H \^Hochi\^H \^H\^H \^H\^H \^Hhci
136 ohci* disabled
137 ohci* disabled
UKC> disable ehci
138 ehci* disabled
139 ehci* disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/15/04, BIOS32 rev. 0 @
0xfd710, SMBIOS rev. 2.31 @ 0xd7010 (36 entries)
bios0: Hewlett-Packard Pavilion zv5200 (PU600UA#ABA)
pcibios0 at bios0: rev 2.1 @ 0xfd710/0x8f0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/208 (11 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1002 product 0x434c
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xd0000/0x6000! 0xd6000/0x1000 0xd7000/0x800!
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP APIC SSDT
acpitimer at acpi0 not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGPB)
acpiprt2 at acpi0: bus 2 (P2P_)
acpiec at acpi0 not configured
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
acpibtn at acpi0 not configured
acpibtn at acpi0 not configured
acpiac at acpi0 not configured
acpibat at acpi0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI Radeon IGP 9100 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "ATI Radeon IGP 9100 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon Mobility IGP 9100" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI SB200 USB" rev 0x01 at pci0 dev 19 function 0 not configured
"ATI SB200 USB" rev 0x01 at pci0 dev 19 function 1 not configured
piixpm0 at pci0 dev 20 function 0 "ATI SB200 SMBus" rev 0x16: SMI
iic0 at piixpm0
pciide0 at pci0 dev 20 function 1 "ATI IXP200 IDE" rev 0x00: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM120JC>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DV-W28EW, C.0S> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
pcib0 at pci0 dev 20 function 3 "ATI SB200 PCI-ISA" rev 0x00
ppb1 at pci0 dev 20 function 4 "ATI SB200 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
"TI TSB43AB21 FireWire" rev 0x00 at pci2 dev 0 function 0 not configured
"Broadcom BCM4306" rev 0x03 at pci2 dev 2 function 0 not configured
rl0 at pci2 dev 3 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:0f:b0:4a:bc:aa
rlphy0 at rl0 phy 0: RTL internal PHY
cbb0 at pci2 dev 4 function 0 "TI PCI1620 CardBus" rev 0x01: irq 10
cbb1 at pci2 dev 4 function 1 "TI PCI1620 CardBus" rev 0x01: irq 10
"TI PCI1620 Misc" rev 0x01 at pci2 dev 4 function 2 not configured
"NEC USB" rev 0x43 at pci2 dev 7 function 0 not configured
"NEC USB" rev 0x43 at pci2 dev 7 function 1 not configured
"NEC USB" rev 0x04 at pci2 dev 7 function 2 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x40
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x40
pcmcia1 at cardslot1
auixp0 at pci0 dev 20 function 5 "ATI IXP200 AC97" rev 0x00: irq 10
auixp0: soft resetting aclink
"ATI IXP200 Modem" rev 0x01 at pci0 dev 20 function 6 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
viasio0 at isa0 port 0x4e/2: VT1211 rev 0x02: HM: not activated WDG:
not activated
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask e77d netmask ef7d ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
softraid0 at root
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auixp0
On 6/7/07, John Danks <[EMAIL PROTECTED]> wrote:
When you see the boot> prompt, type boot -c to get into UKC. From
there type verbose and then quit. This will enable verbose boot
messages so you can see exactly where it stops. When you find the
device you think is causing the problem, reboot into UKC and type
disable device and quit. From your message you might try disable
ohci2, or disable ohci to disable all ohci. More details are available
in the FAQ. Good luck.
--
An OpenBSD user... and that's all you need to know =)
Please, send private emails to [EMAIL PROTECTED]
