resend, since stupid webmailer killed linebreaks:
hi,
after upgrading my router to -current the dsl pppoe connection does not work
anymore.
userland ppp connects fine but freezes after K 30 seconds. freeze means the
connection is still there no errors shown in logs and ifconfig state is normal
but there is no more incoming traffic. the provider and modem hardware is ok
since i'm connected now through a netscreen to write this mail. i changed
nothing
in ppp configuration since years and disabled pf for testing... same problem.
as i can see in source changes: not much has changed in userland ppp and nfe
code
since 4.1.
i read in some forums that it would be better to user kernel pppoe...
so i tried to use kernel pppoe as workaround, but its does not connect. i used
following configuration in /etc/hostname.pppoe0:
inet 0.0.0.0 255.255.255.255 0.0.0.1 pppoedev nfe1 \
authproto pap authname **** authkey **** up
!/sbin/route add default 0.0.0.1
and of course: "up" in /etc/hostname.nfe1
if i enable debug i see a lot of outgoing packages... and then a timeout after
a
while. reconnect and again the same...
it stays in the sppp phase of "establish connection using pap authname ****"
I'm located in germany using arcor as provider.
anyone else using dsl pppoe (kernel/userland) in current or latest snapshots -
maybe in germany with arcor?
any hints are really welcome.
dmesg follows....
regards,
joerg
OpenBSD 4.2 (GENERIC.MP) #0: Wed Aug 8 17:31:49 CEST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2145972224 (2046MB)
avail mem = 2072682496 (1976MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (78 entries)
bios0: vendor Phoenix Technologies, LTD version "ASUS M2N32-SLI DELUXE ACPI
BIOS
Revision 0603" date 06/27/2006
bios0: ASUSTeK Computer INC. M2N32-SLI DELUXE
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP SSDT MCFG APIC
acpitimer at acpi0 not configured
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2411.34 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2410.98 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (HUB0)
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
acpibtn at acpi0 not configured
cpu0: PowerNow! K8 2410 MHz: speeds: 2400 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA C51 Host" rev 0xa2 at pci0 dev 0 function 0 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 1 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 2 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 3 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 4 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 5 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 6 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 7 not configured
ppb0 at pci0 dev 3 function 0 "NVIDIA C51 PCIE" rev 0xa1
pci1 at ppb0 bus 1
ppb1 at pci0 dev 4 function 0 "NVIDIA C51 PCIE" rev 0xa1
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x07
pci3 at ppb2 bus 3
arc0 at pci3 dev 14 function 0 "Areca ARC-1210" rev 0x00: apic 2 int 11 (irq
11)
arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.42 2006-10-13
scsibus0 at arc0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <Areca, ARC-1210-VOL#00, R001> SCSI3 0/direct
fixed
sd0: 476837MB, 56514 cyl, 36 head, 480 sec, 512 bytes/sec, 976562176 sec total
ppb3 at pci2 dev 0 function 2 "Intel IOP332 PCIE-PCIX" rev 0x07
pci4 at ppb3 bus 4
"NVIDIA MCP55 Memory" rev 0xa1 at pci0 dev 8 function 0 not configured
pcib0 at pci0 dev 9 function 0 "NVIDIA MCP55 ISA" rev 0xa2
nviic0 at pci0 dev 9 function 1 "NVIDIA MCP55 SMBus" rev 0xa2
iic0 at nviic0
adt0 at iic0 addr 0x2e: adt7475 rev 0x69
iic1 at nviic0
iic1: addr 0x18 00=f0 01=00 02=00 03=f0 04=00 05=00 06=00 07=00 08=00 09=10
10=08
11=00 12=00 13=0a 14=00 15=00 16=00 17=34 20=95 21=92 22=00 32=00
"NVIDIA MCP55 Memory" rev 0xa2 at pci0 dev 9 function 2 not configured
ohci0 at pci0 dev 10 function 0 "NVIDIA MCP55 USB" rev 0xa1: apic 2 int 7 (irq
7), version 1.0, legacy support
ehci0 at pci0 dev 10 function 1 "NVIDIA MCP55 USB" rev 0xa2: apic 2 int 10
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
pciide0 at pci0 dev 12 function 0 "NVIDIA MCP55 IDE" rev 0xa1: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-H12N, UL01> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 13 function 0 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide1: using apic 2 int 5 (irq 5) for native-PCI interrupt
pciide2 at pci0 dev 13 function 1 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide2: using apic 2 int 5 (irq 5) for native-PCI interrupt
pciide3 at pci0 dev 13 function 2 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide3: using apic 2 int 5 (irq 5) for native-PCI interrupt
ppb4 at pci0 dev 14 function 0 "NVIDIA MCP55 PCI-PCI" rev 0xa2
pci5 at ppb4 bus 5
wi0 at pci5 dev 7 function 0 "Intersil PRISM2.5" rev 0x01: apic 2 int 10 (irq
10)
wi0: PRISM2.5 ISL3874A(Mini-PCI) (0x8013), Firmware 1.0.7 (primary), 1.3.6
(station), address 00:09:5b:2f:6b:8d
"TI TSB43AB22 FireWire" rev 0x00 at pci5 dev 11 function 0 not configured
azalia0 at pci0 dev 14 function 1 "NVIDIA MCP55 HD Audio" rev 0xa2: apic 2 int
11
(irq 11)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Analog Devices/0x198b (rev. 2.0), HDA version 1.0
audio0 at azalia0
nfe0 at pci0 dev 16 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic 2 int 5 (irq
5),
address 00:18:f3:49:aa:86
eephy0 at nfe0 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
nfe1 at pci0 dev 17 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic 2 int 10 (irq
10), address 00:18:f3:49:ad:96
eephy1 at nfe1 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
ppb5 at pci0 dev 18 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci6 at ppb5 bus 6
ppb6 at pci0 dev 20 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci7 at ppb6 bus 7
ppb7 at pci0 dev 22 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci8 at ppb7 bus 8
sili0 at pci8 dev 0 function 0 "CMD Technology SiI3132 SATA" rev 0x01: apic 2
int
11 (irq 11)
scsibus2 at sili0: 2 targets
ppb8 at pci0 dev 23 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci9 at ppb8 bus 9
vga1 at pci9 dev 0 function 0 "NVIDIA GeForce 7600 GT" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
intr_establish: pic ioapic0 pin 7: can't share type 3 with 2
it0 at isa0 port 0x290/8: IT87
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
ugen0 at uhub0 port 9
ugen0: Realtek RTL8187, rev 2.00/1.00, addr 2
uts0 at uhub1 port 7 configuration 1 interface 0
uts0: eGalax Touch Panel, rev 1.10/1.00, addr 2
wsmouse0 at uts0 mux 0
ugen1 at uhub1 port 8
ugen1: MConsult IRTrans USB, rev 1.10/4.00, addr 3
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
_________________________________________________________________
versendet mit www.Oleco.de Mail - Anmeldung und Nutzung kostenlos!
Oleco www.netlcr.de jetzt auch mit SPAMSCHUTZ.
