Hi Peter,
a huge, humongous, tremendous, vast, THANK YOU!
That made it!
I must be blind. I didn't think of that possibility at all... Now I'll
have to compile my own kernel, I guess... brrrr...
Now let's wait for Damien Bergamini The Great to have some time to
finish the support of the wireless 4965AGN chip in wpi(4)
I'll have to investigate a bit more about the sound issue... no sound
until now...
And now, for the record, a dmesg for [EMAIL PROTECTED] x61s:
(yes, I am using an apple USB keyboard, the only hardware I like from apple)
----------
OpenBSD 4.2 (GENERIC.MP) #251: Thu Aug 23 10:55:57 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 1046761472 (998MB)
avail mem = 1004421120 (957MB)
User Kernel Config
UKC> enable acpi
398 acpi0 enabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/23/07, BIOS32 rev. 0 @
0xfdc80, SMBIOS rev. 2.4 @ 0xe0010 (63 entries)
bios0: vendor LENOVO version "7NET21WW (1.02 )" date 04/23/2007
bios0: LENOVO 766636G
pcibios0 at bios0: rev 3.0 @ 0xfdc10/0x3f0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde80/304 (17 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 17 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xe0000/0x10000!
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF!
SSDT SSDT SSDT SSDT
acpitimer at acpi0 not configured
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz ("GenuineIntel"
686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 0 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 0 (EXP2)
acpiprt5 at acpi0: bus 0 (EXP3)
acpiprt6 at acpi0: bus 0 (EXP4)
acpiprt7 at acpi0: bus 5 (PCI1)
acpiec at acpi0 not configured
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpibtn at acpi0 not configured
acpibtn at acpi0 not configured
acpibat at acpi0 not configured
acpibat at acpi0 not configured
acpibat at acpi0 not configured
acpiac at acpi0 not configured
acpidock at acpi0 not configured
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0615092206000922
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1800 MHz (1244 mV): speeds: 1800, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82965GM MCH" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel 82965GM Video" rev 0x0c: aperture
at 0xe0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82965GM Video" rev 0x0c at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: apic 2
int 20 (irq 11), address 00:16:d3:3e:4d:38
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 2
int 20 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 2
int 21 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 2
int 22 (irq 11)
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03:
apic 2 int 17 (irq 11)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Analog Devices/0x1984 (rev. 4.0), HDA version 1.0
azalia0: codec: Conexant/0x2bfa (rev. 0.0), HDA version 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03
pci2 at ppb1 bus 3
"Intel Wireless WiFi Link 4965AGN" rev 0x61 at pci2 dev 0 function 0
not configured
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 2
int 16 (irq 10)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 2
int 17 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 2
int 19 (irq 11)
ehci1: timed out waiting for BIOS
usb1 at ehci1: USB revision 2.0
uhub1 at usb1: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci3 at ppb2 bus 5
cbb0 at pci3 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2
int 16 (irq 10)
"Ricoh 5C832 Firewire" rev 0x04 at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2
int 18 (irq 11)
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x2811 rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x03: apic 2
int 16 (irq 10), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS54161, SB4I> SCSI2 0/direct fixed
sd0: 152627MB, 19457 cyl, 255 head, 63 sec, 512 bytes/sec, 312581808 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic
2 int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ugen0 at uhub2 port 1uhub6 at uhub4 port 1
ugen0: Broadcom Corp BCM2045B, rev 2.00/1.00, addr 2
: Mitsumi Electric Hub in Apple Extended USB Keyboard, rev 1.10/4.10, addr 2
uhidev0 at uhub6 port 2 configuration 1 interface 0
uhidev0: Dell product 0x3010, rev 2.00/2.20, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
ugen1 at uhub2 port 2
ugen1: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 3
uhidev1 at uhub6 port 3 configuration 1 interface 0
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10,
addr 4, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes, country code 13
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub6 port 3 configuration 1 interface 1
uhidev2: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10,
addr 4, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
---------------------
> fwiw, my r60 has always been a lot more pleasant with bsd.mp after
> 'enable acpi'. As in,
>
> 1) at the boot prompt type boot bsd.mp -c
> 2) at the prompt type enable acpi
>
> if that works better, use the config -e magic per the faq
>
> hope this helps you along a bit
>
> Cheers,
> --
> Peter N. M. Hansteen, member of the first RFC 1149 implementation team
> http://bsdly.blogspot.com/ http://www.datadok.no/ http://www.nuug.no/
> "Remember to set the evil bit on all malicious network traffic"
> delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
