hail,
I have an usb th ethernet and can't use it on OpenBSD 4.4. It detects ok,
ifconfigs shows but can't ever get an ip from dhcp server, if I force ip
with ifconfig I can't use either.
the device is:
aue0 at uhub2 port 1 "ADMtek USB To LAN Converter" rev 1.10/2.01 addr 2
aue0: address 00:60:6e:00:18:c0
ukphy1 at aue0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000749, model 0x0001
and dmesg:
# dmesg
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Transmeta(tm) Crusoe(tm) Processor TM5700 ("GenuineTMx86" 586-class)
799 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,CX8,SEP,CMOV,SER,MMX
real mem = 251146240 (239MB)
avail mem = 234381312 (223MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/10/04, BIOS32 rev. 0 @ 0xfa260,
SMBIOS rev. 2.3 @ 0xf0800 (32 entries)
bios0: vendor Phoenix Technologies, LTD version "786R1 v1.07" date 12/10/2004
bios0: Hewlett-Packard hp t5000 series
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP
acpi0: wakeup devices PCI0(S5) LAN0(S5) USB0(S4) USB1(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C3, C2
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x9000 0xcc000/0xa000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Transmeta LongRun Northbridge" rev 0x04
"Transmeta Mem1" rev 0x00 at pci0 dev 0 function 1 not configured
"Transmeta Mem2" rev 0x00 at pci0 dev 0 function 2 not configured
vendor "Transmeta", unknown product 0x0399 (class memory subclass RAM, rev
0x00) at pci0 dev 0 function 3 not configured
uhci0 at pci0 dev 9 function 0 "VIA VT83C572 USB" rev 0x61: irq 15
uhci1 at pci0 dev 9 function 1 "VIA VT83C572 USB" rev 0x61: irq 5
ehci0 at pci0 dev 9 function 2 "VIA VT6202 USB" rev 0x63: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
vga1 at pci0 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
pcib0 at pci0 dev 17 function 0 "VIA VT8231 ISA" rev 0x10
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
viaenv0 at pci0 dev 17 function 4 "VIA VT8231 PMG" rev 0x10: failed to map
PM I/O space
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x51: irq 15, address
00:11:85:e3:2a:17
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fdfd netmask fdfd ttymask ffff
umass0 at uhub0 port 2 configuration 1 interface 0 "Genesys Logic USB TO
IDE" rev 2.00/0.02 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SAMSUNG, SV2044D, 0811> SCSI0 0/direct fixed
sd0: 19464MB, 2481 cyl, 255 head, 63 sec, 512 bytes/sec, 39862368 sec total
aue0 at uhub2 port 1 "ADMtek USB To LAN Converter" rev 1.10/2.01 addr 2
aue0: address 00:60:6e:00:18:c0
ukphy1 at aue0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000749, model 0x0001
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
#
in earlier installations I could get it to drop a message in logs about TX
error, but I couldn't reproduce so far.
if anyone knows how to make it run ok,
thanks,
matheus
--
We will call you cygnus,
The God of balance you shall be
