On Mon, March 2, 2009 21:04, Fred Crowson wrote:
> What's the output of: ifconfig -a ?
# ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33204
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:11:85:e3:2a:17
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::211:85ff:fee3:2a17%vr0 prefixlen 64 scopeid 0x1
inet 10.1.1.90 netmask 0xffffff00 broadcast 10.1.1.255
enc0: flags=0<> mtu 1536
aue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:60:6e:00:18:c0
media: Ethernet autoselect (none)
status: no carrier
inet6 fe80::260:6eff:fe00:18c0%aue0 prefixlen 64 scopeid 0x4
> What's the output of: route show -inet ?
if I use the vr0 if, all is ok, I have keyboard access to the box, so when
on aue0 I have no ip nor routing anything :)
> What happens when you do: /sbin/dhclient aue0
it can't send packets over the wire. just receive (as tcpdump gets
something), so it tries till giving up.
dhclient aue0
DHCPDISCOVER on aue0 to 255.255.255.255 port 67 interval 1
DHCPDISCOVER on aue0 to 255.255.255.255 port 67 interval 2
DHCPDISCOVER on aue0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on aue0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on aue0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on aue0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on aue0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on aue0 to 255.255.255.255 port 67 interval 13
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
if I use vr0 that is ok, I have this:
# dhclient vr0
DHCPREQUEST on vr0 to 255.255.255.255 port 67
DHCPACK from 10.1.1.10
bound to 10.1.1.90 -- renewal in 43200 seconds.
#
I'm asking for help in here cause I have tried this same adapter in
FreeBSD and also get this error, so I exclude here the hardware. Just
FreeBSD 8-current with new drivers make it run ok. is the same tx error.
everything else is ok.
thanks,
matheus
> A bit more information would be helpful.
> Fred
>
> On 3/2/09, Nenhum_de_Nos <[email protected]> wrote:
>> On Mon, March 2, 2009 01:43, Nenhum_de_Nos wrote:
>>> hail,
>>>
>>> I have an usb th ethernet and can't use it on OpenBSD 4.4. It detects
>>> ok,
>>> ifconfigs shows but can't ever get an ip from dhcp server, if I force
>>> ip
>>> with ifconfig I can't use either.
>>>
>>> the device is:
>>>
>>> aue0 at uhub2 port 1 "ADMtek USB To LAN Converter" rev 1.10/2.01 addr 2
>>> aue0: address 00:60:6e:00:18:c0
>>> ukphy1 at aue0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
>>> 0x000749, model 0x0001
>>>
>>> and dmesg:
>>>
>>> # dmesg
>>> OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
>>> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
>>> cpu0: Transmeta(tm) Crusoe(tm) Processor TM5700 ("GenuineTMx86"
>>> 586-class)
>>> 799 MHz
>>> cpu0: FPU,V86,DE,PSE,TSC,MSR,CX8,SEP,CMOV,SER,MMX
>>> real mem = 251146240 (239MB)
>>> avail mem = 234381312 (223MB)
>>> mainbus0 at root
>>> bios0 at mainbus0: AT/286+ BIOS, date 12/10/04, BIOS32 rev. 0 @
>>> 0xfa260,
>>> SMBIOS rev. 2.3 @ 0xf0800 (32 entries)
>>> bios0: vendor Phoenix Technologies, LTD version "786R1 v1.07" date
>>> 12/10/2004
>>> bios0: Hewlett-Packard hp t5000 series
>>> acpi0 at bios0: rev 0
>>> acpi0: tables DSDT FACP
>>> acpi0: wakeup devices PCI0(S5) LAN0(S5) USB0(S4) USB1(S4)
>>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>>> acpiprt0 at acpi0: bus 0 (PCI0)
>>> acpicpu0 at acpi0: C3, C2
>>> acpibtn0 at acpi0: PWRB
>>> bios0: ROM list: 0xc0000/0x9000 0xcc000/0xa000
>>> cpu0 at mainbus0
>>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>>> pchb0 at pci0 dev 0 function 0 "Transmeta LongRun Northbridge" rev 0x04
>>> "Transmeta Mem1" rev 0x00 at pci0 dev 0 function 1 not configured
>>> "Transmeta Mem2" rev 0x00 at pci0 dev 0 function 2 not configured
>>> vendor "Transmeta", unknown product 0x0399 (class memory subclass RAM,
>>> rev
>>> 0x00) at pci0 dev 0 function 3 not configured
>>> uhci0 at pci0 dev 9 function 0 "VIA VT83C572 USB" rev 0x61: irq 15
>>> uhci1 at pci0 dev 9 function 1 "VIA VT83C572 USB" rev 0x61: irq 5
>>> ehci0 at pci0 dev 9 function 2 "VIA VT6202 USB" rev 0x63: irq 10
>>> usb0 at ehci0: USB revision 2.0
>>> uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
>>> vga1 at pci0 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
>>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>>> drm at vga1 unsupported
>>> pcib0 at pci0 dev 17 function 0 "VIA VT8231 ISA" rev 0x10
>>> pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
>>> channel 0 configured to compatibility, channel 1 configured to
>>> compatibility
>>> pciide0: channel 0 disabled (no drives)
>>> pciide0: channel 1 ignored (disabled)
>>> viaenv0 at pci0 dev 17 function 4 "VIA VT8231 PMG" rev 0x10: failed to
>>> map
>>> PM I/O space
>>> vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x51: irq 15, address
>>> 00:11:85:e3:2a:17
>>> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
>>> 0x004063, model 0x0032
>>> usb1 at uhci0: USB revision 1.0
>>> uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
>>> usb2 at uhci1: USB revision 1.0
>>> uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
>>> isa0 at pcib0
>>> isadma0 at isa0
>>> pckbc0 at isa0 port 0x60/5
>>> pckbd0 at pckbc0 (kbd slot)
>>> pckbc0: using irq 1 for kbd slot
>>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>>> pcppi0 at isa0 port 0x61
>>> midi0 at pcppi0: <PC speaker>
>>> spkr0 at pcppi0
>>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>>> biomask fdfd netmask fdfd ttymask ffff
>>> umass0 at uhub0 port 2 configuration 1 interface 0 "Genesys Logic USB
>>> TO
>>> IDE" rev 2.00/0.02 addr 2
>>> umass0: using SCSI over Bulk-Only
>>> scsibus0 at umass0: 2 targets, initiator 0
>>> sd0 at scsibus0 targ 1 lun 0: <SAMSUNG, SV2044D, 0811> SCSI0 0/direct
>>> fixed
>>> sd0: 19464MB, 2481 cyl, 255 head, 63 sec, 512 bytes/sec, 39862368 sec
>>> total
>>> aue0 at uhub2 port 1 "ADMtek USB To LAN Converter" rev 1.10/2.01 addr 2
>>> aue0: address 00:60:6e:00:18:c0
>>> ukphy1 at aue0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
>>> 0x000749, model 0x0001
>>> softraid0 at root
>>> root on sd0a swap on sd0b dump on sd0b
>>> #
>>>
>>> in earlier installations I could get it to drop a message in logs about
>>> TX
>>> error, but I couldn't reproduce so far.
>>>
>>> if anyone knows how to make it run ok,
>>>
>>> thanks,
>>>
>>> matheus
>>>
>>> --
>>> We will call you cygnus,
>>> The God of balance you shall be
>>
>> if anyone can give me any hint to what I could do, I'm no developer, but
>> I
>> could try if there is no other way. would make a great deal for me, as I
>> will make OpenBSD router on existing hardware (no need to buy another).
>>
>> thanks again,
>>
>> matheus
>>
>> --
>> We will call you cygnus,
>> The God of balance you shall be
>>
>>
>
--
We will call you cygnus,
The God of balance you shall be
